Xbox 360 wired controller help

Welcome Page Forums RetroPie Project Controller Configuration in RetroPie Xbox 360 wired controller help

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of tgilly tgilly 1 year, 11 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #102962
    Profile photo of newman

    Please help with setting up a xbox 360 wired controller on retropie 3.0 RC 1 running on Rpi2.

    My controller is connected and blinking. When all is up and running i get to push button A and setup controller. Controller is working outside of all emulators. I can control RetroPie, go in and out of emulators, list roms and start them. But when game starts i can not play it due to the fact that controller is not working in games.

    So i guess controller needs to be configured on some other level so it won’t blink and take position 1 or two or.. so that led is always on.

    How do i do this? Iw looked at so many tutorials but they all differ due to older versions.

    Profile photo of tgilly

    Follow these steps :
    – Install the “Xboxdrv” drivers from the RetroPie setup menu. Choice option 3 and then the last option.
    – Reboot. The lights should no longer be blinking continuously but one player selection should have lit up
    – Emulationstation will ask you to configure the controller again, follow this.
    – Follow these steps as of RetroPie Configuration (

Viewing 2 posts - 1 through 2 (of 2 total)

Forums are currently read only - please visit the new RetroPie forums at

Skip to toolbar