won't load up

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of shock107 shock107 2 years, 7 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #82535
    Profile photo of shock107
    shock107
    Participant

    I’m new to programming and thought I would give this a try. However, I hit a snag. I’m using the raspberry pi B+ and when I put the program on the Micro SD card and start up I’m left on the DOS esque screen with the wording and the very bottom is.

    PANIC:VFS:Unable to mount root fs on unknown-block(179.2)

    Entering kdb(current=0xcf03800, pd1) due to keyboard Entry kdb>

    Key board doesn’t respond, Is there a step I’m missing? any help would be appreciated.

    #82543
    Profile photo of proxycell
    proxycell
    Participant

    hey, did you just copy of the image file over to the memory card?

    #82544
    Profile photo of shock107
    shock107
    Participant

    Sort of. I’m on a mac and when I used pifiller it couldn’t locate the SD card. So I dragged the opened image files to the card itself. Is that the problem I didn’t use a card builder? if so do you guys have a card builder for micro SDs?

Viewing 3 posts - 1 through 3 (of 3 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar