Vintage SNES controller straight to GPIO ports. Help needed with the pinout

Home Forums RetroPie Project Everything else related to the RetroPie Project Vintage SNES controller straight to GPIO ports. Help needed with the pinout

This topic contains 0 replies, has 1 voice, and was last updated by Profile photo of tijn tijn 2 years, 9 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #53080
    Profile photo of tijn
    tijn
    Participant

    Hi!

    I have stripped a SNES console bare and only kept the controller ports and want to connect these ports to straight to the GPIO ports of the Rasp Pi (this because of really limited resources at the moment).

    From the schematics of the RetroPi GPIO Adapter I think this should be the right pinout, and I can use controller 1 in Emulation Station.
    Controller 2 doesn’t work though.

    Have I used the right pins, or should I use others?

    VCC (SNES 1) to P1
    Clock (Snes 2) to P19
    Latch (Snes 3) to P23
    Data 1 (Snes 4) to P7
    Data 2 (Snes 4 on the other side) to P5
    Ground (Snes 7) to P6

    Any help is appreciated!

Viewing 1 post (of 1 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar