Updating Pi, to help w/ controllers

Welcome Page Forums RetroPie Project Everything else related to the RetroPie Project Updating Pi, to help w/ controllers

This topic contains 0 replies, has 1 voice, and was last updated by Profile photo of johnes johnes 3 years, 1 month ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #6973
    Profile photo of johnes
    johnes
    Participant

    Followed guide here:

    Update for the RetroPie Setup Script: Support for RetroArch’s Autoconfig Functionality and (wired) Xbox 360 controller support

    Having couple issues:
    – My 710 and 310 controllers are detected if I run jstest but not in emulationstation.
    – So I followed the guide here: http://blog.petrockblock.com/2013/12/02/retropie-autoconfig-functionality/
    – Step 3 has been running for over 24 hours now… I already had the emulators installed, is it not smart enough to know that? In otherwrds it just downloads, compiles them, etc no matter what?

    Step 1:
    File is not saved at /home/pi/RetroPie/emulators/RetroArch/configs/

    It’s stored here… /home/pi/RetroPie/configs/all/

    But I think there might be something wrong with it.

    Here’s my file:
    system_directory = /home/pi/RetroPie/emulatorcores/
    video_aspect_ratio = 1.33
    video_shader_dir = “/home/pi/RetroPie/shader/”
    video_shader = “/home/pi/RetroPie/shader/*.glslp”
    video_shader_enable = true
    audio_enable = true
    audio_out_rate = 44100
    audio_driver = sdl
    audio_sync = true
    input_player1_a = x
    input_player1_b = z
    input_player1_y = a
    input_player1_x = s
    input_player1_start = enter
    input_player1_select = rshift
    input_player1_l = q
    input_player1_r = w
    input_player1_left = left
    input_player1_right = right
    input_player1_up = up
    input_player1_down = down
    input_player2_a = x
    input_player2_b = z
    input_player2_y = a
    input_player2_x = s
    input_player2_start = enter
    input_player2_select = rshift
    input_player2_l = q
    input_player2_r = w
    input_player2_left = left
    input_player2_right = right
    input_player2_up = up
    input_player2_down = down
    input_player1_joypad_index = 0
    input_player2_joypad_index = 1
    input_enable_hotkey_btn = 8
    input_exit_emulator_btn = 9
    input_enable_hotkey_btn = 8
    input_save_state_btn = 4
    input_enable_hotkey_btn = 8
    input_load_state_btn = 5
    input_player1_left_axis = -0
    input_player1_right_axis = +0
    input_player1_up_axis = -1
    input_player1_down_axis = +1
    input_player2_left_axis = -0
    input_player2_right_axis = +0
    input_player2_up_axis = -1
    input_player2_down_axis = +1
    input_exit_emulator = escape
    input_rewind = r
    rewind_enable = true
    rewind_buffer_size = 10
    rewind_granularity = 2

    2.) I did this, but “Update the input configuration of Emulation Station with the RetroPie Setup Script”

    Finally, I see permissions set like this – why are some pi/pi and some root?
    4 drwxr-xr-x 2 root root 4096 May 24 18:59 cpc4rpi-1.1
    4 drwxrwxr-x 9 pi pi 4096 May 24 18:59 atari800-3.0.0
    4 drwxr-xr-x 6 root root 4096 May 24 19:59 basiliskii
    4 drwxr-xr-x 8 pi 513 4096 May 24 20:10 vice-2.4
    4 drwxr-xr-x 9 root root 4096 May 24 22:21 gpsp
    4 drwxr-xr-x 9 pi users 4096 May 25 07:30 advancemame-0.94.0
    4 drwxr-xr-x 11 pi pi 4096 May 25 09:18 mame4all-pi
    4 drwxr-xr-x 10 root root 4096 May 25 13:33 pifba
    4 drwxr-xr-x 6 pi pi 4096 May 25 13:43 osmose-0.8.1+rpi20121122
    4 drwxr-xr-x 15 root root 4096 May 25 14:18 dgen-sdl
    4 drwxr-xr-x 6 root root 4096 May 25 15:35 gngeo-pi-0.85

Viewing 1 post (of 1 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar