TinyLCD3.5

This topic contains 0 replies, has 1 voice, and was last updated by Profile photo of wolpak wolpak 2 years, 7 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #82739
    Profile photo of wolpak
    wolpak
    Participant

    I am new to Raspberry Pi and linux, but I decided to try my hand at making a PiBoy. I am using a B+ and a TinyLCD3.5 screen attached by the GPIO. After days of configuration, I finally have the drivers for the screen working and Retropie installed. My issue is that Retropie only outputs via the HDMI out and the screen sits on Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. When I hit F4, it drops to the command line.

    How do I have Retropie point to my LCD screen and not HDMI out?

    After much searching, I found this repository,

    https://github.com/tasanakorn/rpi-fbcp

    And I believe I installed it correctly, but it made no difference. Is this possible? (It would suck if it weren’t) and if so, what am I doing incorrectly?

Viewing 1 post (of 1 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar