Street fighter 3 in fba

This topic contains 10 replies, has 4 voices, and was last updated by Profile photo of Floob Floob 2 years, 1 month ago.

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • #97181
    Profile photo of g0nz0uk
    g0nz0uk
    Participant

    Hello,
    #I just need to know if I on a losing battle hear and should give up, but has anyone managed to get Street Fighter 3 working in FBA, I’ve tried so many roms 🙁

    Having the same with Buddy Boy too in Mame.

    Any experts managed to get these working?

    #97182
    Profile photo of kitchuk
    kitchuk
    Participant

    Yeah sf3 third strike works perfect in fba-libretro but not the standalone emulator. Check the retropie wiki for the correct FBA romset version you need.

    #97184
    Profile photo of g0nz0uk
    g0nz0uk
    Participant

    Just finf this link

    Can’t see SF3 unless it is these?

    sfz3a
    sfz3ar1
    sfz3j
    sfz3jr1
    sfz3jr2

    #97186
    Profile photo of g0nz0uk
    g0nz0uk
    Participant

    So I have to change the standard emulator, but how?

    #97187
    Profile photo of g0nz0uk
    g0nz0uk
    Participant

    I am toalking about SF3 Third Strike too, I’ve tried everything and can’t get it to work.

    #97189
    Profile photo of darkblaster77
    darkblaster77
    Participant

    Street Fighter 3 on the Raspberry Pi 2

    Perhaps you may find this youtube video useful.

    #97193
    Profile photo of Floob
    Floob
    Member

    Street Fighter 3 works fine using fba-libretro.

    You can see the compatible games here:
    https://github.com/libretro/fba-libretro/blob/master/svn-current/trunk/gamelist.txt

    Here they are listed in an image:
    http://picpaste.com/sf3.PNG

    So as long as you use the right romset for fba-libretro it will run fine. (So obviously dont run fba, run fba-libretro)

    You choose which fba emulator you want by pressing “x” as the rom starts.

    Here is a link to show which is the correct romset to use:

    MAME versions and romsets on RetroPie

    RetroPie help guides --> https://goo.gl/Yfy8kj
    Please read this before asking for help --> http://goo.gl/eLErnl

    #97196
    Profile photo of g0nz0uk
    g0nz0uk
    Participant

    So as long as you use the right romset for fba-libretro it will run fine. (So obviously dont run fba, run fba-libretro)

    I think this is where I’m getting confused, I have all the roms and copied them to the roms\fba folder, none of them worked. Upon boot up I hit x and there seems to be only 2 emualtors to choose from, pifba and ir-fba and again neither worked for me.

    What am I doing wrong?

    #97198
    Profile photo of Floob
    Floob
    Member

    Yes, the roms should be in (with RetroPie v3)
    /home/pi/RetroPie/roms/fba/

    And that screen you see, you choose lr-fba (as opposed to pifba).

    If the roms dont work then, you dont have the right versions.
    This shows how to verify that you do have the right roms for fba-libretro
    https://github.com/retropie/RetroPie-Setup/wiki/Managing-ROMs

    RetroPie help guides --> https://goo.gl/Yfy8kj
    Please read this before asking for help --> http://goo.gl/eLErnl

    #97199
    Profile photo of g0nz0uk
    g0nz0uk
    Participant

    yes found the right rom and used lr-fba and it works.

    I have a rom roms that don’t work in mame, so do I use Clrmamepro to fix this?

    #97208
    Profile photo of Floob
    Floob
    Member

    If thats working for you, I’ll mark this thread as resolved. Feel free to start a new one if you have a different issue.

    RetroPie help guides --> https://goo.gl/Yfy8kj
    Please read this before asking for help --> http://goo.gl/eLErnl

Viewing 11 posts - 1 through 11 (of 11 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar