SNES Config

This topic contains 4 replies, has 2 voices, and was last updated by Profile photo of sadj2885 sadj2885 2 years ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #99763
    Profile photo of sadj2885
    sadj2885
    Participant

    I upgraded to 2.6 last night by doing a fresh install. Ever since the controls for SNES havent been working properly. Im using a USB SNES controller and the start button exits the emulator and it seems like the only button that does anything is X. NES and Megadrive work properly. Anyone have any idea why this is happening or where to look for what might be causing it? I’m not too familiar with the config files, but from the ones I did look at, everything seems to be setup correctly.

    #99765
    Profile photo of herbfargus
    herbfargus
    Member

    my guess is all your buttons work but your dpad? it’s a controller issue that I had, this thread seems to have solved it: http://blog.petrockblock.com/forums/topic/usb-snes-controller-d-pad-not-working-in-games/#post-97091

    #99785
    Profile photo of sadj2885
    sadj2885
    Participant

    Dpad buttons work im pretty sure. I followed the instructions, deleting all the cfg files and rerunning the setup. Still having the issue though. Only with SNES emulator. I did notice when I hit the start button and it quits it says cannot find joystick mapping for USB gamepad, using default. Not sure if that has anything to do with it. I also don’t get the yellow popup saying Joypad port 0 like i do with i launch Megadrive or NES games.

    #99786
    Profile photo of herbfargus
    herbfargus
    Member

    hmm. You could try changing the emulator from the x or m menu as the rom loads (there are 6 different snes emulators)- that way you can at least rule out that.

    #99788
    Profile photo of sadj2885
    sadj2885
    Participant

    I was able to get it working. I had put my roms in the snes9x-rpi folder originally. I moved them to the snes folder, deleted all the config files and reran the setup. Everything seems to be working now. Thanks for your help.

Viewing 5 posts - 1 through 5 (of 5 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar