Setting up controls with Retropie

Welcome Page Forums RetroPie Project New to RetroPie? Start Here! Setting up controls with Retropie


This topic contains 0 replies, has 1 voice, and was last updated by  lobsterlake 2 years, 1 month ago.

Viewing 1 post (of 1 total)
  • Author
  • #112093


    I am new to using Raspberry Pi and Retropie. I recently built my own arcade cabinet and need some help with how to set up the controls. I am using the joystick and 30mm buttons (white) shown in this guide and a Raspberry Pi 2 Model B with the latest version of Retropie. I have connected them appropriately to the GPIO pins and am stuck from there on. I have searched looking for answers, but it appears that there are none on the web, which is why I ended up here. If you could show me some guidance or a good walk through that would be great!

Viewing 1 post (of 1 total)

Forums are currently read only - please visit the new RetroPie forums at

PLEASE NOTE: All orders that are placed between January 14th and January 28th will be shipped on January 29th. Dismiss