Segmentation fault (in log) – many systems

Welcome Page Forums RetroPie Project Everything else related to the RetroPie Project Segmentation fault (in log) – many systems

This topic contains 6 replies, has 4 voices, and was last updated by Profile photo of shoothere shoothere 1 year, 4 months ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #119901
    Profile photo of retroshaun
    retroshaun
    Participant

    As the subject says, I am getting segmentation faults in loads of systems. For example, SNES, Intellivision, Videopac, GBA etc. Whereas other systems are working perfectly.

    Any ideas how to fix this? Retropie 3.6 with a Pi 3.

    Tnx!

    #119913
    Profile photo of zerojay
    zerojay
    Participant

    Are you overclocked? Could be that you have an unstable overclock if so.

    #119977
    Profile photo of retroshaun
    retroshaun
    Participant

    Not that I am aware of no. Can I check that somehow?

    #120103
    Profile photo of retroshaun
    retroshaun
    Participant

    Well I fixed the SNES problems (bad roms it seems) but some other systems still dont work – GBA seems to be the main offender. Roms look OK.

    #120518
    Profile photo of neighbourhoodnerd
    neighbourhoodnerd
    Participant

    In my experience, segfaults are caused by overheating which can corrupt the memory card. If you’re overclocking, make sure you have a heatsink or an open case.

    You might be able to reinstall the emulator to fix this issue if it’s only affecting the one system.

    #120534
    Profile photo of zerojay
    zerojay
    Participant

    Did you install the GBA bios?

    #120579
    Profile photo of shoothere
    shoothere
    Participant

    I’m with zerojay on this one. It will segfault if the GBA bios isn’t found and good romsets are also crucial (learnedthis myself the hard way).

Viewing 7 posts - 1 through 7 (of 7 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar