Resolution

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of haleswd haleswd 4 years ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #1957
    Profile photo of haleswd
    haleswd
    Participant

    I installed your Pi image and booted up. I am using HDMI cable to an old flat screen 32″ TV. No matter what I do, I can’t shrink the resolution so that I can see everything. I have messed with the /boot/config.txt file and I must be doing something wrong. I tried setting the default frame size and the overscan size. I’m stumped.

    Here is a picture of what I see when trying to configure the initial input. Any help that you could give me would be appreciated.

    http://www.flickr.com/photos/haleswd/8927047068/

    #1986
    Profile photo of petrockblog
    petrockblog
    Keymaster

    Did you try the two one liners mentioned at https://github.com/retropie/RetroPie-Setup/wiki/Video-Issues?

    #1994
    Profile photo of haleswd
    haleswd
    Participant

    I had already tried disable_overscan=1, and that did not work. I will try this hdmi_drive=2 and let you know. Thanks for the suggestions.

Viewing 3 posts - 1 through 3 (of 3 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar