RaspberryPi Mobel B+ Issues

This topic contains 3 replies, has 2 voices, and was last updated by  Anonymous 3 years, 2 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #82602

    Anonymous

    Hi Everyone,

    I bought a Raspberry Pi Model B+ (as I wanted lots of USB ports), I downloaded the RetroPie Project SD-card Image V2.3 image via PetrockBlog downloads page & Win32 Disk Imager v0.9.5 via Sourceforge.

    I then loaded the RetroPi image onto an 64GB exFAT (128kb allocated) MicroSD card using Win32 Disk Imager and safely ejected the card. Stuck it into the RaspberryPi, plugged in the HDMI and power and nothing.

    Blank screen.
    Any thoughts?

    #82604

    fortinbra
    Participant

    You might try formatting as FAT instead of exFAT, then once it boots, expand via the raspi-config. I had to do this to get my 16GB to work.

    #82608

    Anonymous

    Isn’t it only possible to format FAT up to 32GB?

    #82637

    Anonymous

    Sorted it out… Now need to wait for the controllers to arrive and find my old USB keyboard!

Viewing 4 posts - 1 through 4 (of 4 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

PLEASE NOTE: All orders that are placed between January 14th and January 28th will be shipped on January 29th. Dismiss