Raspberry Pi B+ Issues

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of InsecureSpike InsecureSpike 2 years, 10 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #28850
    Profile photo of flickcorp
    flickcorp
    Participant

    I plan on using a 64GB micro SD to run a ton of roms and a USB Hub. My pi is fitted with 3 copper heat sinks to support the power on my Raspberry Pi B+ with everyone’s experience what would the best power output for this setup I plan to have two wireless controllers down the road with that being said I have two wired at the moment.

    Raspberry Pi B 512mb
    Generic 64gb SD
    Overclock Turbo

    Raspberry Pi B+ 512mb
    Generic 128gb MicroSD
    Overclock Turbo

    Raspberry Pi2 B 1gb
    Samsung Evo 16gb MicroSD
    Overclock Pi2

    #29040
    Profile photo of InsecureSpike
    InsecureSpike
    Participant

    I at the moment have a fan running net to mine, after the corruption I had within the first few days, which shot my usb drive, it now has heat sinks and I’m still terrified lol, it wasn’t even over clocked, but I’m gonna mount a fan or to in my case, oh I even had the case on with out it’s lid on haha,

    #29055
    Profile photo of trimmtrabb
    trimmtrabb
    Participant

    A 2A psu will power the B+ and have enough juice to power the 4 usb ports, even with power hungry devices like portable hard drives: http://www.raspberrypi.org/forums/viewtopic.php?f=63&t=82823

    If you have found the solution to your problem please mark the topic as resolved.

    #29299
    Profile photo of InsecureSpike
    InsecureSpike
    Participant

    I understood very little of that post! but I’m thinking it’s because I’m still a novice, I’ll re read it later,

Viewing 4 posts - 1 through 4 (of 4 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar