Power issue

Tagged: 

This topic contains 0 replies, has 1 voice, and was last updated by  unklmnky69 3 years, 5 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #6980

    unklmnky69
    Participant

    Up until this point, I have been able to find the answers to all my questions either here or elsewhere on the interwebs, but I now that I have my pi in a case, I am having power issues. I am using a neutrik usb passthrough to provide power to my pi, and if I connect the usb to the power block directly, no problem. But if I use the passthrough, the screen blanks out, sometimes for a second or two, sometimes for good. I’m at a loss how to fix this. Are these connectors not able to pass through stable voltage? Am I missing some crucial step?

    http://www.neutrik.com/en/multimedia/usb/nausb-w-b

    After more research I have become familiar with the raspi’s power requirements and shortcomings and will be changing my build to receive power from a certified powered usb hub, and use the passthrough for connection of a second controller.

    http://www.amazon.com/Belkin-Aluminium-Powered-Adapter-Desktop/dp/B00K8AB1MI/ref=cm_wl_huc_item

Viewing 1 post (of 1 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/