Odd Gamecon issue

This topic contains 0 replies, has 1 voice, and was last updated by Profile photo of lifeasasuffix lifeasasuffix 3 years ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #7618
    Profile photo of lifeasasuffix
    lifeasasuffix
    Participant

    I’m having a rather strange problem with the Gamecon GPIO driver when installed through the RetroPie setup script.
    Here’s the breakdown;
    Installed the system from the RetroPie SD image, setup network, memory split, overclocked to medium, etc. When I first power on I get to the main emulator screen fine, but no controller control, no keyboard, nothing. Alt F4 exits fine, so the keyboard is detected. When I exit I type jstest /dev/inputs/js0 I get a return of no directory.
    I enter into the setup script, reinstall gpio, set the controller map (2 PSX) and restart emulationstation, and all is right with the world. Until the next power off, then the process starts all over again. This is a new build so a rebuild isn’t out of the question.
    Here are a few pics of the project for good measure:


Viewing 1 post (of 1 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar