NeoGeo Roms Not Working

This topic contains 5 replies, has 4 voices, and was last updated by Profile photo of Floob Floob 2 years, 1 month ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
  • #97006
    Profile photo of danbeast94

    So most of my NeoGeo Roms will not work on my retropie. I looked and they are all zip files and everything looks right. Breakers is one of the few that do work, the rest say “rom not supported” and kick me back to the menu. Any help would be greatly appreciated.

    Profile photo of labelwhore

    You’re either using the wrong version of the roms, or the wrong emulator.

    to find out which roms or emulator you should be using:

    Here’s how to fix it:

    This is an extremely common problem, a little search would have found many many threads on the topic.

    Once you get this fixed, Capcom CPS 1 and 2 roms will work unmodified in the PiFBA emulator. I assume you hadn’t discovered yet, given this issue. ;P
    ^^ my other hobby

    Profile photo of mavic19

    Do you have the BIOS placed in either the FBA or NEOGEO rom folders?

    Profile photo of danbeast94

    I did put the in the NeoGeo rom folders, but not the FBA folder, I will try that.

    Profile photo of danbeast94

    Thanks for the advice. I guess I was too lazy to search, my bad. I will try to get them working now.

    Profile photo of Floob

    Are you using RetroPie 2.6 or 3.0?
    I use gngeo as the NeoGeo emulator, but there are other options as mentioned above.

    You can see the romsets needed for each here:

    MAME versions and romsets on RetroPie

    RetroPie help guides -->
    Please read this before asking for help -->

Viewing 6 posts - 1 through 6 (of 6 total)

Forums are currently read only - please visit the new RetroPie forums at

Skip to toolbar