Viewing 1 post (of 1 total)
  • Author
    Posts
  • devil78
    Participant
    Post count: 37

    Hi Alls, i’ve installed the mk_arcade_joystick_rpi driver but the last Retropie Version (3.4) and i noticed that the file /etc/modules is not loaded at boot time… suggestions?

    It works fine when i give this command in the terminal…

    sudo modprobe mk_arcade_joystick_rpi map=1 (26 pin GPIO Raspberry or 40 pin Raspberry with one joystick)

    sudo modprobe mk_arcade_joystick_rpi map=1,2 (40 pin Raspberry with two joystick)

    thanks!

Viewing 1 post (of 1 total)
  • The forum ‘GPIO Adapter, ControlBlock etc.’ is closed to new topics and replies.