Mapping Xin-Mo USB properly.

This topic contains 1 reply, has 1 voice, and was last updated by  jonnebrog 3 years, 5 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #6999

    jonnebrog
    Participant

    I have recently updated my kernel using the guide provided on this site, http://ithink.ch/blog/2013/09/08/patching_the_linux_kernel_to_install_the_xin-mo_dual_arcade_driver_on_a_raspberry_pi.html and everything worked wonderfully.
    When I run jstest /dev/input/js0 all buttons and axes register perfectly. Before the kernel update left and up did not register on neither joysticks. Axes 0 and 1 is for joystick #1 and Axes 2 and 3 is for joystick #2 before the update the 0 on the axes turned to 32767 and now it has added -32767 but still the same 0,1,2,3 axes as the layout.
    The first thing I do is to remove es_input.cfg and then start ES to map out a few keys to the menu.
    My problem then is to map the keys to my ROMs, witch i have no idea how to lay out in retroach.

    #7000

    jonnebrog
    Participant

    This is my button layout and a pic of my jstest

    Attachments:
Viewing 2 posts - 1 through 2 (of 2 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/