Many configuration

This topic contains 2 replies, has 1 voice, and was last updated by  totoland75 2 years, 10 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #44249

    totoland75

    Hello,

    I have a raspberry pi B+ and i want to change the priority sounds by pass by Jack 3.1 and not the HDMI

    I want the sound get out by the jack
    i want the video get out by the HDMI

    Others questions :

    I want to know how the cabler gpio port directly for my arcade gamepag this the model B+. someone have a wiring diagram, thanks you ? I have 2 player : one joystick and 6 button by player (x2) and 1 button start, 1 select, 1 save, 1 load, 1 coins.

    I want know if retropie automatically detects a gamepad arcade on port gpio ?

    thanks for the answer

    #44894
    Profile photo of borlandoflorida
    borlandoflorida
    Participant

    To get the sounds out of jack, you need to alter the setting in the Raspberry Pi Config settings:

    sudo raspi-config

    Then select option 8 Advanced Options. You should then see another option called Audio. Select this and then choose to force the audio out through the 3.5mm jack.

    Finally:

    sudo reboot

    As for your other questions, I’m afraid I can’t help but hopefully you’ll now be 50% of the way to an answer!

    #44950

    totoland75

    very big thanks for your answer borlandoflorida

    i think find to my other question i tested and reply if this ready

Viewing 3 posts - 1 through 3 (of 3 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar