Loaded through script but didnt work

Welcome Page Forums RetroPie Project Everything else related to the RetroPie Project Loaded through script but didnt work

This topic contains 3 replies, has 2 voices, and was last updated by  cmcnr 2 years, 11 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
  • #86294


    I have a preinstall debian OS on my sd card. I used retropie script with “source-based (custom) installation” to install. All done after 30 hours. I didnt remove any option while installing.
    But, it is not work on boot. it is also not working through lx terminal too. I wrote “emulation station”,”emulationstation”…
    As a newbie to a linux system, need help.



    I would need to look at a log to see if anything didn’t work – you are probably better off with doing a binary install though – most of the binaries are reasonably up to date currently. if new to linux – using the prebuilt 2.4.2 image might do you even better.



    The os on the current system has an image which provides to work 4 inch tft. Unfortunately, there is no driver for the tft. Thus i have to setup retropie on an existing image. This is why i cant use an prebuilt image.

    I will try with binaries. I will write if the same problem reoccur.



    I loaded with binaries. This time, i am getting the error which is below. Looking for a solution….

    Creating config directory “/home/pi/.emulationstation”
    1v10: Error initializing SDL!
    fbcon not available
    1v10: Renderer failed to initialize!
    1v10: Window failed to initialize!

Viewing 4 posts - 1 through 4 (of 4 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

PLEASE NOTE: All orders that are placed between January 14th and January 28th will be shipped on January 29th. Dismiss