Is an GPIO connected HDD LED and WIFI LED possible?

Welcome Page Forums RetroPie Project GPIO Adapter, ControlBlock etc. Is an GPIO connected HDD LED and WIFI LED possible?

Tagged: 

This topic contains 0 replies, has 1 voice, and was last updated by  c3po 2 years, 1 month ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #111283

    c3po
    Participant

    Hi all,

    I’m new here. First of all, thanks for this great project!

    I installed my Pi B+ into an old Atari 2600 case. So far so good. RetroPie is running…

    To switch on and off, I also ordered the POWERBLOCK – it’s working fine, it was easy to install, great piece of work!

    The second part I want to implement is an HDD LED or better SD Card activity LED and an WIFI or general network availability activity LED.

    I tried to find something on the internet, but I found nothing usable.

    Has someone installed additional LEDs together with the PowerBlock? any help is appreciated.

    Thanks in advance,
    C3PO

Viewing 1 post (of 1 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

PLEASE NOTE: All orders that are placed between January 14th and January 28th will be shipped on January 29th. Dismiss