How to use Savestates SNES9X NEXT

This topic contains 5 replies, has 4 voices, and was last updated by  Floob 2 years, 8 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #97404

    depechem70
    Participant

    How can I use Savestates on SNES9X NEXT? I cnt find Keyboard Shortcuts on the net

    Thanks for Help

    #97411

    herbfargus
    Member

    By default it should be F2 to save and F4 to load. (Assuming you are using the libretto snes9x next.) Look at the section under hotkeys here:
    https://github.com/retropie/RetroPie-Setup/wiki/RetroArch-Configuration

    #97493

    depechem70
    Participant

    Does not work for me. I use the Libretto Version. Retropie 3 beta

    #97503

    momaw27
    Participant

    I use the default gamepad option which is:

    Save: hold SELECT + RIGHT TRIGGER
    Load: hold SELECT + LEFT TRIGGER

    After mixing these up for a while in my head I’ve landed on remembering it this way… LOAD and LEFT both begin with an “L”

    Hope that helps!

    #97508

    depechem70
    Participant

    Yeah this helps. Many Thanks

    #97516

    Floob
    Member

    Does not work for me. I use the Libretto Version. Retropie 3 beta

    This is probably because you need to enable hotkeys (hold select) then press F2.
    Or as you have found, use the joypad equivalent.

    RetroPie help guides --> https://goo.gl/Yfy8kj
    Please read this before asking for help --> http://goo.gl/eLErnl

Viewing 6 posts - 1 through 6 (of 6 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

PLEASE NOTE: All orders that are placed between January 14th and January 28th will be shipped on January 29th. Dismiss