How to add emulators to EmulatorStation

Welcome Page Forums RetroPie Project Everything else related to the RetroPie Project How to add emulators to EmulatorStation

This topic contains 2 replies, has 2 voices, and was last updated by  dunuk 3 years, 8 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #6810

    dunuk
    Participant

    How can I add further emulators to the EmulatorStation slide (menue)?

    I ran a source-based installation where I selected all emulators. After the installation has finished (after many hours) I checked the es_systems.cfg. There I found entries for all previous installed emulators. Furthermore under folder emulators I found subfolderes for all emulators.
    I rebooted the RPi and expected that the new installed emulators will appear on the EmulatorStation slide menue. But only the standard emulators (Apple II, Atari 2600, Doom, Duke Nukem 3D, DOS x86) were available (as before installation).
    What else has to be done to include the new installed emulator to the slide menue?

    #6811

    trimmtrabb
    Participant

    Hi, you need to put roms in the relevant directories for the emulator pages to show up: https://github.com/retropie/RetroPie-Setup/wiki/How-to-get-ROMs-on-the-SD-card

    If you have found the solution to your problem please mark the topic as resolved.

    #6823

    dunuk
    Participant

    Many thanks, now it works. Is this information described in any how to? I didn’t find this secret at all.

Viewing 3 posts - 1 through 3 (of 3 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

PLEASE NOTE: All orders that are placed between January 14th and January 28th will be shipped on January 29th. Dismiss