GPIO 1.x on Raspi 2

Home Forums RetroPie Project GPIO Adapter, ControlBlock etc. GPIO 1.x on Raspi 2


This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of petrockblog petrockblog 2 years, 3 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #88604
    Profile photo of phreeze

    I got a working GPIO adapter for the Pi1, works great, but I want it to run on the Pi2.

    I put it on the pi2, but doesn’t seem to work. I leave the colored flatcable on the “interior” side of the Pi. I’ve put the GPIo to the far right, and to the far left, doesn’t seem to work :-/

    i correctly chose in the retropie_setup the snesdev 1.x first, den buttons and pad, rebootet.

    SNESdev is running as a process, even after reboot.
    The button doesn’t work either, so sth seems wrong

    Profile photo of petrockblog

    SNESDev, the driver for the adapter, needs an updated GPIO library for the RPi 2. It might be that you need to re-compile SNESDev as described at

    Does that help?

Viewing 2 posts - 1 through 2 (of 2 total)

Forums are currently read only - please visit the new RetroPie forums at

Skip to toolbar