FB Alpha 0.2.97.35 ??

This topic contains 9 replies, has 6 voices, and was last updated by Profile photo of barbudreadmon barbudreadmon 2 years, 3 months ago.

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #90894
    Profile photo of blockaboots
    blockaboots
    Participant

    Has the latest version of FBA been complied for RPi2 yet??

    #90904
    Profile photo of amigagamer
    amigagamer
    Participant

    .35 works but its much slower than .30 on rpi2.

    https://github.com/libretro/libretro-fba recent mainline 0.2.97.35
    I compiled this last week and suffered major slowdowns in CPS2/3 games

    https://github.com/libretro/fba-libretro 0.2.97.30 works really well giving a good balance of performance vs relatively new rom sets. its the one retropie uses and i wouldn’t recommend upgrading at the moment.

    #90909
    Profile photo of blockaboots
    blockaboots
    Participant

    Ok thanks. whats the deal with hardly any (if any at all) Namco games not being supported by FAB?

    #90932
    Profile photo of Floob
    Floob
    Member

    What about the native non-libretro FBA that comes on 2.6.0 – the performance seems ok? Or maybe I dont test enough games 🙂

    RetroPie help guides --> https://goo.gl/Yfy8kj
    Please read this before asking for help --> http://goo.gl/eLErnl

    #90937
    Profile photo of justinbeaird
    justinbeaird
    Participant

    FBA liberto runs great on rpi2, but you will need to remap the exit+hotkey button on controller or it won’t let you input coin in some games

    #90949
    Profile photo of scaryevilguy
    scaryevilguy
    Participant

    FBA liberto runs great on rpi2, but you will need to remap the exit+hotkey button on controller or it won’t let you input coin in some games

    In FBA Libretro, the Coin input (Select Button) works fine for me on NeoGeo games but not on Capcom ones. Is there something I can add to the config to force it to use select as Coin input? How did you fix it justinbeaird?

    #90964
    Profile photo of justinbeaird
    justinbeaird
    Participant

    What controller are you using? on my Xbox controller I made the hotkey the back button and the big Xbox button in center of controller the exit button+insert coin and it is working fine.

    #90968
    Profile photo of scaryevilguy
    scaryevilguy
    Participant

    I’m using a logitech dual action.

    #90969
    Profile photo of justinbeaird
    justinbeaird
    Participant

    Basicly just try switching the hotkey button and the exit button in controller config and see if that works

    #90989
    Profile photo of barbudreadmon
    barbudreadmon
    Participant

    On rpi2, you need to compile https://github.com/libretro/libretro-fba with “make -f makefile.libretro profile=performance” to use a hack on SH-2 emulator (which allow to run CPS3 games at full speed), i mentioned it when i reported my libretro port on this forum. Also i did not experience any slow down on m68k games (CPS,CPS2,Cave,…), you sure about that ? Could you name some games ? You ran retroarch through runcommand.sh to set cpu governor on performance ?

Viewing 10 posts - 1 through 10 (of 10 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar