Dreamcast

This topic contains 56 replies, has 22 voices, and was last updated by Profile photo of alfalfa alfalfa 1 year, 3 months ago.

Viewing 35 posts - 1 through 35 (of 57 total)
  • Author
    Posts
  • #112467
    Profile photo of roydenstorm
    roydenstorm
    Participant

    Have the Dreamcast emulator working, it loads no problem, but I cant get passed the “set date/time” screen, I am able to change the date/time, so left/right and up/down work, I just cannot use “select” button. I’ve tried changing the config files for my controller(xbox 360 wireless) and anything else I could think of. Any and all help would be greatly appreciated.

    p.s. I also just got the Intellivision emulator working though I am having some controller issues with it as well, I just haven’t taken a look yet to see if I can fix it, but if anyone already knows what to do please let me know πŸ™‚

    Thanking you all in advance for your time and effort it will be greatly appreciated πŸ™‚

    P.S.S Have been trying to find a solution already, check this link out before posting any solutions here please to make sure it has not been tried already :).

    https://github.com/RetroPie/RetroPie-Setup/issues/1147#issuecomment-167152830

    #112469
    Profile photo of herbfargus
    herbfargus
    Member
    #112471
    Profile photo of roydenstorm
    roydenstorm
    Participant

    Thanks but I’ve been there too and that doesn’t help, though I appreciate the help πŸ™‚

    #112475
    Profile photo of gizmo98
    gizmo98
    Participant

    Please post your /opt/retropie/configs/dreamcast/emu.cfg and the files under /opt/retropie/configs/dreamcast/mappings/.

    #112480
    Profile photo of roydenstorm
    roydenstorm
    Participant

    here’s the info you requested πŸ™‚

    Attachments:
    #112482
    Profile photo of gizmo98
    gizmo98
    Participant

    Looks good if you have “only one” xbox controller and this controller is event device 7. Could you post the content of controller_XboxGamepad(userspacedriver).cfg as well?

    #112490
    Profile photo of roydenstorm
    roydenstorm
    Participant

    ok hope this is the one you wanted

    Attachments:
    #112493
    Profile photo of gizmo98
    gizmo98
    Participant

    Please transfer hex values of this file https://github.com/reicast/reicast-emulator/blob/master/shell/linux/mappings/controller_xboxdrv.cfg into your controller config file.

    #112509
    Profile photo of roydenstorm
    roydenstorm
    Participant

    That actually worked. Thank you for you help it has been greatly appreciated.

    #112605
    Profile photo of flourpowder
    flourpowder
    Participant

    I just had this problem, only with the xbox one controller. Typing in the hex values worked as well for me, but select doesn’t quit the emulator. In fact, no buttons or combinations that I have tried quits. Any suggestions as to how to fix this?

    #112648
    Profile photo of roydenstorm
    roydenstorm
    Participant

    If you’re asking about the Dreamcast emulator, for me ctrl+alt+del exits the emulator, that works for most the emulators that I am unable to exit by means of a button combination on my controller. Hope this helps πŸ™‚

    #112651
    Profile photo of gizmo98
    gizmo98
    Participant

    0x137 (select) should work as a exit button.

    #112796
    Profile photo of eightkiller
    eightkiller
    Participant

    Hy, I read the whole thread and all the other ones on the forum, but i don’t manage to make my XBox 360 wired controller work.
    I have the same problem of being stuck not being able to press the “select” button to validate the date.

    I copied the Hex values in my controller_XboxGamepad(userspacedriver).cfg:

    [emulator]
    mapping_name = Xbox 360 Controller (xboxdrv userspace driver)
    btn_escape = 0x13a
    
    [dreamcast]
    btn_a = 0x130
    btn_b = 0x131
    btn_c = 0x136
    btn_d = 0x137
    btn_x = 0x133
    btn_y = 0x134
    btn_z = 0x13d
    btn_start = 0x13b
    axis_x = 0x00
    axis_y = 0x01
    axis_trigger_left = 0x0a
    axis_trigger_right = 0x09
    
    [compat]
    axis_dpad1_x = 0x10
    axis_dpad1_y = 0x11
    

    And here is my emu.cfg:

    
    backend = oss
    disable = 0
    
    [config]
    Debug.SerialConsoleEnabled = 0
    Dreamcast.Broadcast = 4
    Dreamcast.Cable = 3
    Dreamcast.RTC = 2082730217
    Dreamcast.Region = 3
    Dynarec.Enabled = 1
    Dynarec.idleskip = 1
    Dynarec.unstable-opt = 0
    aica.LimitFPS = 1
    aica.NoBatch = 0
    aica.NoSound = 0
    axis.0 = Axis_X
    axis.1 = Axis_Y
    bios.UseReios = 0
    pvr.MaxThreads = 3
    pvr.Subdivide = 0
    pvr.SynchronousRendering = 0
    pvr.rend = 0
    rend.UseMipmaps = 1
    rend.WideScreen = 0
    ta.skip = 0
    
    [input]
    evdev_device_id_1 = 0
    evdev_device_id_2 = -1
    evdev_device_id_3 = -1
    evdev_device_id_4 = -1
    evdev_mapping_1 = /opt/retropie/configs/dreamcast/mappings/controller_XboxGamepad(userspacedriver).cfg
    joystick_device_id = -1
    
    [reios]
    ElfFile = 
    
    [validate]
    OpenGlChecks = 0[input]
    

    I also tried to add this to my emu.cfg:

    
    [Xbox 360 Controller (xboxdrv userspace driver)]
    button.0=DPad_Up
    button.1=DPad_Down
    button.2=DPad_Left
    button.3=DPad_Right
    button.4=Btn_A
    button.5=Btn_B
    button.6=Btn_X
    button.7=Btn_Y
    button.10=Axis_LT
    button.11=Axis_RT
    button.12=Quit
    button.13=Btn_Start
    axis.0=Axis_X
    axis.1=Axis_Y
    

    But it does nothing more, i was wondering if the evdev_device_id was correct set to 0 ? I have tagged my usb XBox controller on the top-left usb port on my Raspbery 2.

    Thanks in advance for your help, i think i missed something or didn’t understand something !

    #112927
    Profile photo of labelwhore
    labelwhore
    Participant

    I recently started fresh with retropie 3.3, so I have to go through this again, sadly. Reicast was working perfectly for me previously.

    I tried what was suggested above; adding the hex values to controller_XboxGamepad(userspacedriver).cfg. That fixed most of my buttons, but the start button still does not work.

    here’s my controller_XboxGamepad(userspacedriver).cfg:

    [emulator]
    mapping_name = Xbox Gamepad (userspace driver)
    btn_escape = 0x13a
    
    [dreamcast]
    btn_a = 0x130 
    btn_b = 0x131 
    btn_c = 0x136 
    btn_d = 0x137 
    btn_x = 0x133 
    btn_y = 0x134 
    btn_z = 0x13d 
    btn_start = 0x13b
    axis_x = 0x00 
    axis_y = 0x01 
    axis_trigger_left = 0x0a 
    axis_trigger_right = 0x09 
    
    [compat]
    axis_dpad1_x = 0x10
    axis_dpad1_y = 0x11
    axis_dpad2_x =
    axis_dpad2_y =
    axis_x_inverted = no
    axis_y_inverted = no
    axis_trigger_left_inverted =
    axis_trigger_right_inverted =
    axis_dpad1_y_inverted = no
    axis_dpad1_x_inverted = no
    

    http://www.th3rdwave.com/tracks/
    ^^ my other hobby

    #112950
    Profile photo of Omnija
    Omnija
    Participant

    Turns out sometimes the emulator won’t pick up the controllers settings. I had to delete the emu.cfg to have it recognize the new inputs.

    #113004
    Profile photo of gizmo98
    gizmo98
    Participant

    Just take libretro config file as base and add 304 to every value.
    https://github.com/libretro/retroarch-joypad-autoconfig/blob/master/udev/XboxGamepad(userspacedriver).cfg

    So select and start should be:
    start = 313d = 0x139h
    select = 312d = 0x138h

    Or add 305. I’m not really certain if id_offset is 304, 305 or 307.

    #113106
    Profile photo of labelwhore
    labelwhore
    Participant

    I’m not really sure what happened, maybe a hidden character because I edited the file in windows. The settings shown in my post above are what eventually worked.

    I tried changing the value for the start button to 0x139, which didn’t work. I then tried simply swapping start and select, and suddenly both worked, so I changed them back to what they were originally and now everything works.

    http://www.th3rdwave.com/tracks/
    ^^ my other hobby

    #113107
    Profile photo of eightkiller
    eightkiller
    Participant

    Hy,

    Here is the holy grail for me, i’m sharing my config with you, I tried a lot of things πŸ™‚ I use a Wired Xbox360 controller and here are the values for the exact same use of buttons than with the original dreamcast controller:

    [emulator]
    mapping_name = Xbox Gamepad (userspace driver)
    btn_escape = 0x13a
    
    [dreamcast]
    btn_a = 0x130h
    btn_b = 0x131h
    btn_c = 
    btn_d = 0x139h
    btn_x = 0x133h
    btn_y = 0x134h
    btn_z = 0x138h
    btn_start = 0x13Bh
    axis_x = 0x00
    axis_y = 0x01
    axis_trigger_left = 0x0a
    axis_trigger_right = 0x09
    
    [compat]
    axis_dpad1_x = 0x10
    axis_dpad1_y = 0x11
    

    Hoping this would help lost souls like i was ^^, pretty damn annoying finding the proper hexadecimal codes.
    Select is used to leave Reicast, and all other buttons are properly linked.

    See you on the forum πŸ™‚

    #113375
    Profile photo of hiphenchives
    hiphenchives
    Participant

    test

    #113378
    Profile photo of hiphenchives
    hiphenchives
    Participant

    Hi,

    I’m running Retropie 3.3 and I’ve encountered the following issues with Dreamcast that I’ve not found any relation to on the web.

    My PS3 (R) Controller is not responding in Dreamcast. I’ve followed https://github.com/RetroPie/RetroPie-Setup/wiki/Dreamcast and Floob’s video with no success.

    emu.cfg

    [PLAYSTATION(R)3 Controller]
    axis.0 = Axis_X
    axis.1 = Axis_Y
    button.0 = Btn_Z
    button.1 = Btn_C
    button.10 = DPad2_Left
    button.11 = DPad2_Right
    button.12 = Btn_Y
    button.13 = Btn_B
    button.14 = Btn_A
    button.15 = Btn_X
    button.16 = Quit
    button.2 = Btn_D
    button.3 = Btn_Start
    button.4 = DPad_Up
    button.5 = DPad_Right
    button.6 = DPad_Down
    button.7 = DPad_Left
    button.8 = Axis_LT
    button.9 = Axis_RT

    backend = oss
    disable = 0

    [config]
    Debug.SerialConsoleEnabled = 0
    Dreamcast.Broadcast = 4
    Dreamcast.Cable = 3
    Dreamcast.RTC = 2083336649
    Dreamcast.Region = 3
    Dynarec.Enabled = 1
    Dynarec.idleskip = 1
    Dynarec.unstable-opt = 0
    aica.LimitFPS = 1
    aica.NoBatch = 0
    aica.NoSound = 0
    bios.UseReios = 0
    pvr.MaxThreads = 3
    pvr.Subdivide = 0
    pvr.SynchronousRendering = 0
    pvr.rend = 0
    rend.UseMipmaps = 1
    rend.WideScreen = 0
    ta.skip = 0

    [input]
    evdev_device_id_1 = 0
    evdev_device_id_2 = 3
    evdev_device_id_3 = -1
    evdev_device_id_4 = -1
    evdev_mapping_1 = /opt/retropie/configs/dreamcast/mappings/controller_USBGamepad.cfg
    evdev_mapping_2 = /opt/retropie/configs/dreamcast/mappings/controller_SonyPLAYSTATION(R)3Controller.cfg
    joystick_device_id = -1

    [reios]
    ElfFile =

    [validate]
    OpenGlChecks = 0

    Controller mapping below

    [emulator]
    mapping_name = Sony PLAYSTATION(R)3 Controller
    btn_escape = 288

    [dreamcast]
    btn_a = 300
    btn_b = 303
    btn_c =
    btn_d =
    btn_x = 301
    btn_y = 302
    btn_z =
    btn_start = 291
    btn_dpad1_left = 295
    btn_dpad1_right = 293
    btn_dpad1_up = 292
    btn_dpad1_down = 294
    btn_dpad2_left =
    btn_dpad2_right =
    btn_dpad2_up =
    btn_dpad2_down =
    axis_x = 0
    axis_y = 1
    axis_trigger_left =
    axis_trigger_right =

    [compat]
    btn_trigger_left = 296
    btn_trigger_right = 297
    axis_dpad1_x = 2
    axis_dpad1_y = 3
    axis_dpad2_x =
    axis_dpad2_y =
    axis_x_inverted = no
    axis_y_inverted = no
    axis_trigger_left_inverted =
    axis_trigger_right_inverted =
    axis_dpad1_y_inverted = no
    axis_dpad1_x_inverted = no

    My USBgamepad works flawlessly in most games but in Virtua striker the Dpad 2 is not responding at all. Any suggestions would do.

    [emulator]
    mapping_name = USB Gamepad
    btn_escape = 296

    [dreamcast]
    btn_a = 288
    btn_b = 291
    btn_c =
    btn_d =
    btn_x = 289
    btn_y = 290
    btn_z =
    btn_start = 297
    btn_dpad1_left =
    btn_dpad1_right =
    btn_dpad1_up =
    btn_dpad1_down =
    btn_dpad2_left =
    btn_dpad2_right =
    btn_dpad2_up =
    btn_dpad2_down =
    axis_x = 0
    axis_y = 1
    axis_trigger_left =
    axis_trigger_right =

    [compat]
    btn_trigger_left = 292
    btn_trigger_right = 293
    axis_dpad1_x =
    axis_dpad1_y =
    axis_dpad2_x =
    axis_dpad2_y =
    axis_x_inverted = no
    axis_y_inverted = no
    axis_trigger_left_inverted =
    axis_trigger_right_inverted =

    Any suggestion would help.

    #113381
    Profile photo of labelwhore
    labelwhore
    Participant

    there are no controls at all mapped for Dpad 2 in what you posted. You say it works in some games? I don’t see how it could ever work with those settings.

    http://www.th3rdwave.com/tracks/
    ^^ my other hobby

    #113383
    Profile photo of hiphenchives
    hiphenchives
    Participant

    Thanks for your feedback.

    With USBGamepad I can play Soul Calibur and Powerstone with those configs. I was surprised at beginning when I noticed it worked without any mappings. I also tried to add values around the ones displayed, obviously with no success.

    With PS3(R) I was trying to delete [input]
    evdev_device_id_1 = 0 …etc because from what I saw in tutorial video from Floob those lines were missing, but every time I would start a game they would be generated again.

    #113384
    Profile photo of labelwhore
    labelwhore
    Participant

    idk if possibly the ps3 controller might work in a similar way to the xbox360 controller; by using the hex values instead of the “normal” values. I’d assume they wouldn’t be the same, however.

    http://www.th3rdwave.com/tracks/
    ^^ my other hobby

    #113518
    Profile photo of hiphenchives
    hiphenchives
    Participant

    anyone else cares to add to this, please ?

    #113637
    Profile photo of adid4s
    adid4s
    Participant

    Ok so I’ve done something right and I’m able to play dreamcast, buy for some reason the left and right trigger buttons don’t work, everything else is fine though, anyone encounter this? If so what did you change or add, also how do I enable the 2nd controller

    I’m using xbox 360 wireless controllers

    #113802
    Profile photo of b-grigorev
    b-grigorev
    Participant

    Hello!
    Please tell me why the Dreamcast games brakes?

    #115247
    Profile photo of egutierg
    egutierg
    Participant

    Anybody with an Xarcade tankstick controller???? That have dreamcast up and running?

    [input]
    evdev_device_id_1 = 3
    evdev_device_id_2 = 4
    evdev_device_id_3 = -1
    evdev_device_id_4 = -1
    evdev_mapping_1 = /opt/retropie/configs/dreamcast/mappings/controller_Xarcade-to-GamepadDevice.cfg
    evdev_mapping_2 = /opt/retropie/configs/dreamcast/mappings/controller_Xarcade-to-GamepadDevice.cfg
    joystick_device_id = -1

    Will be changing date and time but wont select select to run ROM.

    #115253
    Profile photo of labelwhore
    labelwhore
    Participant

    dreamcast controls are supposed to get set up somewhat automatically, but from what I’ve seen you need to edit the field manually. The values that are set in the file are nowhere near correct, at least not for an xbox 360 controller. I have no idea what they need to be for a X Arcade stick, but my guess is not what they start out as.

    http://www.th3rdwave.com/tracks/
    ^^ my other hobby

    #115318
    Profile photo of debgugel
    debgugel
    Participant

    Can you please share the code file that you are using for the emulation?
    Also which hardware is connected with it?
    Please share the details of your whole setup.
    And what is the role of Xarcade tankstick controller here?

    board assembly

    #115336
    Profile photo of egutierg
    egutierg
    Participant

    This is what I have on ./reicast/mappings $ controller-Xarcade-toGamepadDevice.cfg

    [emulator]
    mapping_name = Xarcade-to-Gamepad Device
    btn_escape = 8

    [dreamcast]
    btn_a = 0
    btn_b = 1
    btn_c =
    btn_d =
    btn_x = 3
    btn_y = 4
    btn_z =
    btn_start = 9
    btn_dpad1_left =
    btn_dpad1_right =
    btn_dpad1_up =
    btn_dpad1_down =
    btn_dpad2_left =
    btn_dpad2_right =
    btn_dpad2_up =
    btn_dpad2_down =
    axis_x = 0
    axis_y = 1
    axis_trigger_left =
    axis_trigger_right =

    [compat]
    btn_trigger_left = 294
    btn_trigger_right = 295
    axis_dpad1_x =
    axis_dpad1_y =
    axis_dpad2_x =
    axis_dpad2_y =
    axis_x_inverted = no
    axis_y_inverted = no
    axis_trigger_left_inverted =
    axis_trigger_right_inverted =

    All it does on the Dreamcast Emulator is the joystick works but none of the buttons works.

    It is connected to a Raspberri Pi2

    The Xarcade tankstick controller is used with retropie and emulation station to run NES, SNES, N64, Mame and PlayStation 1. Currently working as I want to. Wanted to add Dreamcast to the collection.

    This is what I have on /opt/retropie/configs/all/Retroarch-joypads $ Xarcade-to-GamepadDevice.cfg

    input_device = “Xarcade-to-Gamepad Device”
    input_driver = “udev”
    input_r_btn = “7”
    input_save_state_btn = “7”
    input_start_btn = “9”
    input_exit_emulator_btn = “9”
    input_l_btn = “6”
    input_load_state_btn = “6”
    input_up_axis = “-1”
    input_a_btn = “0”
    input_b_btn = “1”
    input_reset_btn = “1”
    input_down_axis = “+1”
    input_right_axis = “+0”
    input_state_slot_increase_axis = “+0”
    input_x_btn = “3”
    input_menu_toggle_btn = “3”
    input_select_btn = “2”
    input_enable_hotkey_btn = “2”
    input_y_btn = “4”
    input_left_axis = “-0”
    input_state_slot_decrease_axis = “-0”

    Any help will be greatly appreciated.

    #119413
    Profile photo of dgtliqd
    dgtliqd
    Participant

    I too would like to know how to get my X-Arcade Tankstick controls working again. The controls worked fine in RetroPie 3.2, but after updating to 3.6, it appears the method to configure the controls has changed. Below are the contents of my 2 config files from RetroPie 3.6. I’ve also included the old, working emu.cfg file from RetroPie 3.2 at the bottom. Thanks in advance!

    emu.cfg
    —————————————–
    [Xarcade-to-Gamepad Device]
    button.0 = Btn_X
    button.1 = Btn_Y
    button.2 = Axis_LT
    button.3 = Btn_A
    button.4 = Btn_B
    button.5 = Axis_RT
    button.8 = Quit
    button.9 = Btn_Start

    backend = oss
    disable = 0

    [config]
    Debug.SerialConsoleEnabled = 0
    Dreamcast.Broadcast = 4
    Dreamcast.Cable = 3
    Dreamcast.RTC = 2088437481
    Dreamcast.Region = 3
    Dynarec.Enabled = 1
    Dynarec.idleskip = 1
    Dynarec.unstable-opt = 0
    aica.LimitFPS = 1
    aica.NoBatch = 0
    aica.NoSound = 0
    bios.UseReios = 0
    pvr.MaxThreads = 3
    pvr.Subdivide = 0
    pvr.SynchronousRendering = 0
    pvr.rend = 0
    rend.UseMipmaps = 1
    rend.WideScreen = 0
    ta.skip = 0

    [input]
    evdev_device_id_1 = 0
    evdev_device_id_2 = -1
    evdev_device_id_3 = -1
    evdev_device_id_4 = -1
    joystick_device_id = -1

    [reios]
    ElfFile =

    [validate]
    OpenGlChecks = 0

    controller_Xarcade-to-GamepadDevice1.cfg
    —————————————–
    [emulator]
    mapping_name = Xarcade-to-Gamepad Device 1
    btn_escape = 296

    [dreamcast]
    btn_a = 291
    btn_b = 292
    btn_c =
    btn_d =
    btn_x = 288
    btn_y = 289
    btn_z =
    btn_start = 297
    btn_dpad1_left =
    btn_dpad1_right =
    btn_dpad1_up =
    btn_dpad1_down =
    btn_dpad2_left =
    btn_dpad2_right =
    btn_dpad2_up =
    btn_dpad2_down =
    axis_x = 0
    axis_y = 1
    axis_trigger_left =
    axis_trigger_right =

    [compat]
    btn_trigger_left = 294
    btn_trigger_right = 295
    axis_dpad1_x =
    axis_dpad1_y =
    axis_dpad2_x =
    axis_dpad2_y =
    axis_x_inverted = no
    axis_y_inverted = no
    axis_trigger_left_inverted =
    axis_trigger_right_inverted =

    OLD, Working emu.cfg from RetroPie 3.2
    —————————————–
    [config]
    Dynarec.Enabled=1
    Dynarec.idleskip=1
    Dynarec.unstable-opt=0
    Dreamcast.Cable=3
    Dreamcast.RTC=1543276800
    Dreamcast.Region=3
    Dreamcast.Broadcast=4
    aica.LimitFPS=1
    aica.NoBatch=0
    aica.NoSound=0
    rend.UseMipmaps=1
    rend.WideScreen=0
    pvr.Subdivide=0
    ta.skip=0
    pvr.rend=0
    Debug.SerialConsoleEnabled=0
    bios.UseReios=0

    [validate]
    OpenGlChecks=0

    [Xarcade-to-Gamepad Device]
    button.0=Btn_X
    button.1=Btn_Y
    button.2=Axis_LT
    button.3=Btn_A
    button.4=Btn_B
    button.5=Axis_RT
    button.8=Quit
    button.9=Btn_Start
    axis.0=Axis_X
    axis.1=Axis_Y
    axis.2=
    axis.3=
    axis.4=
    axis.5=
    button.6=
    axis.6=
    button.7=
    axis.7=
    axis.8=
    axis.9=
    button.10=
    axis.10=
    button.11=
    axis.11=
    button.12=
    axis.12=
    button.13=
    axis.13=
    button.14=
    axis.14=
    button.15=
    axis.15=
    button.16=
    axis.16=
    button.17=
    axis.17=
    button.18=
    axis.18=
    button.19=
    axis.19=
    button.20=
    axis.20=
    button.21=
    axis.21=
    button.22=
    axis.22=
    button.23=
    axis.23=
    button.24=
    axis.24=
    button.25=
    axis.25=
    button.26=
    axis.26=
    button.27=
    axis.27=
    button.28=
    axis.28=
    button.29=
    axis.29=
    button.30=
    axis.30=
    button.31=
    axis.31=

    [reios]
    ElfFile=

    #120027
    Profile photo of twitch0815
    twitch0815
    Participant

    ANyone have the config for a AkiShop Ps360+ In Dreamcast?

    #120129
    Profile photo of abs7
    abs7
    Participant

    Please can you kindly help me to get my SFC30 working with Dreamcast. Everytime i edit the controller_8BitdoSFC30GamePadJoystick.cfg file in /opt/retropie/configs/dreamcast/mappings/ it reverts back to the original mappings. So i know why its not working.

    Do i need to edit another file? possiblly /opt/retropie/configs/dreamcast/emu.cfg ?

    Thanks in advance.

    #120529
    Profile photo of idontexist
    idontexist
    Participant

    I’m also having similar issues using these PowerA ProEx controllers that work well with other emulators.

    emu.cfg
    controller_USBDownlo01.50ProEx.cfg

    I haven’t edited these files yet because I do not know what values to use.

    I did read the dreamcast setup page in the wiki but am still stumped as to how to get this working.

    #120710
    Profile photo of dgtliqd
    dgtliqd
    Participant

    Since others are having the same issue with their controllers, maybe the question should be posed a little differently. Does anyone know HOW to get the hex values for the controller inputs in the newer version of reicast?

Viewing 35 posts - 1 through 35 (of 57 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar