Desperate help needed!!

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of gamesfan gamesfan 1 year, 4 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #121537
    Profile photo of rissien73
    rissien73
    Participant

    Hello everyone and thanks for a great forum….. I am in need of help and have trawled forums/websites for several weeks but cant seem to find a solution. I have purchased a pi2 enabled arcade cabinet which has two joysticks and 3 buttons per player. It is running retropie 3.2 ( I think ). My problem is that the controls work fine for MAME and Fba but I am unable to use the Nintendo or Sega emulators as the keybindings are all over the place. eg on Nintendo the LH joystick works but the buttons for the game are split between player 1 and player 2 buttons, also I am unable to exit the emulator and have to power cycle the pi to quit. The controls are wired to an ipac 2 which then goes into the pi by usb. I have read soooo much I am now officially confused and would love any guidance to sort this issue out. many Thanks in advance.

    #121555
    Profile photo of gamesfan
    gamesfan
    Participant

    Step 1: Take the SD card from the RaspberryPI and put it in your PC.
    Step 2: Download Win32DiskImager, Point to your SD card and click READ. This will make a BACKUP of your SD card. You can currupt the hell out of it by shutting down incorrectly, presonaly I run my builds from USB flash drives as they are far more stable.
    Step 3: Now that you have your backup, put the car back into the Raspberry.

    Now, this is the issue with buying something (premade), we dont know if they jacked with the menus, settings etc. But I will assume they didnt.

    The first step is to see what emulator core the other systems are using, I find the libereto the easiest to configure as there is a controller menu. It SHOULD display what emulator it is using, or ask you to press any key once a game launches. If it doesnt, someone messed with the runcommand.sh.

    If you do this, see what core its using and follow the wiki to configure the controls for that core. If it is liberato by chance then we can go to the next step

    Step 4: Is there a display at the bottom when you load a game that shows what controller configuration it is using? If so, connect your Raspberry pi to your routher and SSH into it via putty or connect to its samba shares via \\RETROPIE\ from your windows explorer.

    Go into configurations and find your controller CFG files, you can edit them with a text editior. From there you can assign your buttons.

    If it is a Xarcade, it uses MAME standard confgs like 5 , 6 for coin and 1 and 2 for P1 and P2 start.

    You may find that pressing COIN 1 and (SOMEOTHER) button bring up the Retroarch config menu.. This will allow you to create \ save emulator \ game specific key remap files.

    Of course if this seems daunting, you can always upgrade to the latest version using the setup scripts.

    You can also start fresh copy the ROMS and BIOS off first through \\RETROPIE and start with a new image, configure it yourself so you understand what is going on and then put the roms back on.

    If all else fails you can always restore from your backup you made earlier.

    Does the person you bought it from provide support?

Viewing 2 posts - 1 through 2 (of 2 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar