Controlling kodi with arcade controls

Welcome Page Forums RetroPie Project Controller Configuration in RetroPie Controlling kodi with arcade controls

Tagged: 

This topic contains 2 replies, has 2 voices, and was last updated by  bionicleeroy 2 years ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #113101

    bionicleeroy
    Participant

    Hi all, newbie here!
    With a lot of help from the forums and petrockblock.com I have built a miniarcade running a pi2 and retropie with retrogame to control input via arcade stick and buttons. I’m a novice on a steep learning curve but managed to get it all running perfect (Again using some help), problem I have now is I would like to use my joystick to navigate kodi so it needs to see input as a keystroke but a little stumped on this, had a play with keymap.xml but no luck at the mo… any ideas ??

    #113104

    dudleydes
    Participant

    You can try using Linux Joystick Mapper. Full instructions below:

    http://blog.petrockblock.com/forums/topic/mapping-a-game-controller-in-kodi/#post-106586

    #113116

    bionicleeroy
    Participant

    Thank shall have a look tomorrow, thanks!

Viewing 3 posts - 1 through 3 (of 3 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

PLEASE NOTE: All orders that are placed between January 14th and January 28th will be shipped on January 29th. Dismiss