Controller #'s for PS3 controllver Via USB

Welcome Page Forums RetroPie Project Everything else related to the RetroPie Project Controller #'s for PS3 controllver Via USB

Tagged: 

This topic contains 7 replies, has 6 voices, and was last updated by  imnew 3 years, 3 months ago.

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #1349

    Cael
    Participant

    i managed to for now whie i wait for answers on the raspberryPi forums about the 360 controller and xboxdrv, i got the PS3 (Sony) controller working using this: http://booting-rpi.blogspot.ro/2012/08/dualshock-3-and-raspberry-pi.html

    the numbers i got from mine are:

    O=13 X=14 SQ=15 Tri12

    rightD 5
    Left D=7
    Up D=4
    down D=6

    sel=0
    start3

    (sorry i didnt write down offhand what L1/2 R1/2 and L3/R3 were because recognition is… “Buggy” at best. would probbly be better if i had tghe pi on an  higher PSU (using an 1.2A atm as it seems like the power comming from my 2A PSU isnt clean (i was getting false mmc time out errors on my SD Card and went away after changing PSU’s)

    #1351

    petrockblog
    Keymaster

    Great!

    You are invited to add this information to the wiki 🙂

    #1353

    Cael
    Participant

    Done i just recently woke up so if it needs any polishing. be my guest but the nitty gritty is up :3

    #1397

    petrockblog
    Keymaster

    Thanks for adding that article!

    #2492

    adepaolis
    Participant

    Just wondering. My Raspberry Pi has only 2 usb ports. How do you juggle the three devices during the config? The three devices being the bluetooth dongle, the keyboard, and the sony ps3 joypad?

    #2493

    billipo
    Participant

    Powered USB hub, probably.

    #2884

    mistertml
    Participant

    Hi

    I have just installed retropie but dont have a Bluetooth dongle to use with my PS3 controller. Is it possible to just plug the ps3 controller wired via USB and will it work then? as I am struggling with this at the mo!
    Thanks in advance

    #81868

    imnew
    Participant

    Hi
    I have just installed retropie but dont have a Bluetooth dongle to use with my PS3 controller. Is it possible to just plug the ps3 controller wired via USB and will it work then? as I am struggling with this at the mo! Thanks in advance

    I’m wondering the same thing – did you get this working?

Viewing 8 posts - 1 through 8 (of 8 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

PLEASE NOTE: All orders that are placed between January 14th and January 28th will be shipped on January 29th. Dismiss