Configuring snes usb controller for GBA Retropie v 2.4.2

Home Forums RetroPie Project Everything else related to the RetroPie Project Configuring snes usb controller for GBA Retropie v 2.4.2

This topic contains 3 replies, has 2 voices, and was last updated by Profile photo of Floob Floob 2 years, 4 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #86126
    Profile photo of rasmushauschild
    rasmushauschild
    Participant

    Hi Retropie forum,
    I have bought an snes usb controller, and I can’t get it to work properly with the GBA emulator since it needs to be configured specifically for the GBA. I’m using Retropie 2.4.2, and I haven’t been able to find a guide for this new version. Do any of you know how to do this in Retropie 2.4.2? I hope you will help a newbie like me out 🙂

    #86127
    Profile photo of Floob
    Floob
    Member

    There are details of how to set up the controller here:
    https://github.com/retropie/RetroPie-Setup/wiki/The-gpSP-Emulator

    RetroPie help guides --> https://goo.gl/Yfy8kj
    Please read this before asking for help --> http://goo.gl/eLErnl

    #86128
    Profile photo of rasmushauschild
    rasmushauschild
    Participant

    Hi Floob.
    I have tried all the commands but they all resultat in an error message “no such file directory. Do you know why?

    #86129
    Profile photo of Floob
    Floob
    Member

    I run a game, then press F10 to bring up the in game menu that allows you to configure your joypad.

    RetroPie help guides --> https://goo.gl/Yfy8kj
    Please read this before asking for help --> http://goo.gl/eLErnl

Viewing 4 posts - 1 through 4 (of 4 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar