Change resolution HDMI

This topic contains 3 replies, has 2 voices, and was last updated by Profile photo of peanut peanut 3 years, 3 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #5557
    Profile photo of peanut
    peanut
    Participant

    Hello all! I have a sega Naomi arcade Cabinet and would like to put in my raspberry. I use a HDMI to VGA converter which works with any TFT I used so far but the naomi universal ‘hanatarex’ screen only accepts 800×600 resolution

    is it possbile to output a 800×600 resolution on the raspberry pi using the hdmi output

    #5559
    Profile photo of peanut
    peanut
    Participant

    I solved the issue changing the config.txt in the bood folder. hdmi_mode=9

    #5561
    Profile photo of evanstewy
    evanstewy
    Participant

    Glad you figured it out. Could you set your post to resolved at the top?

    #5607
    Profile photo of peanut
    peanut
    Participant

    done :p

Viewing 4 posts - 1 through 4 (of 4 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar