Can't Register my Controller

Home Forums RetroPie Project Controller Configuration in RetroPie Can't Register my Controller

This topic contains 4 replies, has 3 voices, and was last updated by Profile photo of herbfargus herbfargus 1 year, 10 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
  • #103683
    Profile photo of zyren


    I have a retrolink controller that looks like the SNES. When I go into sudo ./ the menu looks correct. I go to option 3 for setup then when i look at my list its not the same as all the videos ive watched. Option 317 says Install RetroArch joypad autoconfigs. I have tested the controller in the jstest and it works and shows correct. Why do I not have the Register fuction on line 317?

    Any help is appreciated. Thanks

    Profile photo of petrockblog

    Because the options are not locked to the numbers. As new options are added the ordering can change etc. So look for the equivalent menu entry by the text.

    Profile photo of zyren

    I dont have any option to register with RetroArch 🙁

    Profile photo of zyren

    hopefully this helps. here is a couple screenshots of my menu.

    Profile photo of herbfargus

    Its option 318… But if you built from the retropie 3.0 image it will automatically configure your retroarch configs along with the emulation station configs on first boot.

Viewing 5 posts - 1 through 5 (of 5 total)

Forums are currently read only - please visit the new RetroPie forums at

Skip to toolbar