Atari 2600 resolution

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of theroamer theroamer 2 years, 10 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #34216
    Profile photo of theroamer
    theroamer
    Participant

    Anyone know if there is a way to get Atari 2600 to fill the screen? Right now it’s in a very small box in the center of the screen, but I want to stretch it larger. I’ve done a lot of searching and all I can find is the retroarch config to change the aspect ratio, which works (squashes or stretched) but it still stays in a very small box on my HDTV.

    #34322
    Profile photo of spiffo
    spiffo
    Participant

    Mmmmm, mine fills the screen, try:

    Editing the es_system.cfg file so that for the Atari 2600 <command> it reads runcommand.sh 2, arther than runcommand.sh 1

    The 1 makes it go to VGA whereas the 2 keeps the existing resolution.

    And set your TV Pictue Mode (or equivalent) to 4:3 ratio

    Those two changes worked for me !

    #35095
    Profile photo of theroamer
    theroamer
    Participant

    Sweet, that worked. Thanks!

Viewing 3 posts - 1 through 3 (of 3 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar