2 different controllers?

This topic contains 2 replies, has 3 voices, and was last updated by  ceuse 2 years, 10 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #90577

    princeshoko1
    Participant

    So I got a .cfg that works great with a xbox360 wired controller. And one that works great with a PS3 Rock Candy wireless controller.

    But when I try to get both controllers working at the same time they both show up as player 1 on the controllers Light and funky things happen buttons get confused and at some points both wont work at all.

    Is this not possible to get 2 different types to work at the same time? Or perhaps its user error? Would be nice to know before I keep trying to get them working if it can’t happen.

    Thanks
    Shoko

    #91090

    davejaca
    Participant

    which emulator are you using? It was a pain for me to get an x360 and a ds3 working with n64/psx but got there eventually. Let me know and I can help with those two, video where I set up the controls for n64 here: https://www.youtube.com/watch?v=lh0n5PWN2lI&t=242

    #91243

    ceuse
    Participant

    what helped/did the trick for me to get it to work under N64 was manually modify the mupen64plus.cfg file. make sure to set all controllers there to mode 0 (manual configuration) otherwise your manual changes will be overwritten.

Viewing 3 posts - 1 through 3 (of 3 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

PLEASE NOTE: All orders that are placed between January 14th and January 28th will be shipped on January 29th. Dismiss