Reply To: GPIO encoder driver (NO LUCK)



What doesn’t work ? if the problem is it doesn’t load automatically from /etc/modules that’s because the instructions are wrong (for Jessie) – put just the module name in /etc/modules (mk_arcade_joystick_rpi) and put the options in /etc/modprobe.d/mk_arcade_joystick.conf (options mk_arcade_joystick_rpi map=1,2)

You should report this on the issue tracker on the

PLEASE NOTE: All orders that are placed between January 14th and January 28th will be shipped on January 29th. Dismiss