Trouble enabling USB Controllers in Emulation Station

Home Forums RetroPie Project Controller Configuration in RetroPie Trouble enabling USB Controllers in Emulation Station

RetroPie has a new website and forum. Please visit https://retropie.org.uk/ for the new site. The new forum is located at https://retropie.org.uk/forum/. This forum is left here as a read-only archive.

This topic contains 3 replies, has 2 voices, and was last updated by Profile photo of meneerjansen meneerjansen 1 year ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #121127
    Profile photo of zznoisesc
    zznoisesc
    Participant

    Hi All,

    Love to get some help here as I feel like I’ve plowed hours into getting my controllers working. I have 2 genuine SNES controllers that are connecting via a USB adapter such as this:

    http://www.amazon.com/Retro-Link-SNES-Controller-Adapter-Dual/dp/B00BYH9Q4Y

    The controllers are detected and usable in Retropie-Setup and any similar GUI menus but aren’t detected via Emulation Station or RetroArch. I’ve tried using all available drivers in RetroArch to no avail. Details:

    Pi Model: 2
    RetroPie Version Used: 3.6
    Built From: Binary

    Config zip file is here: http://s000.tinyupload.com/index.php?file_id=38328388345365941902

    Any help is greatly appreciated!

    Thanks!

    • This topic was modified 1 year ago by Profile photo of zznoisesc zznoisesc.

    #121143
    Profile photo of meneerjansen
    meneerjansen
    Participant

    May depend on the emulator you’re using to play (SNES?) games. In some emulators I still have to set up my controller via the setup menu of the emulator itself.

    Can you give an example of a game and emulator (read: console) that doesn’t work?

    #121232
    Profile photo of zznoisesc
    zznoisesc
    Participant

    It seems like it does depend on the emulator. The default emulator for SNES games seems to be lr-snes9x-next, which doesn’t detect the controller at all. As a test I switched the emulator to snes9x and for the most part the controller works save some button mappings (start and select don’t work). So I guess the question becomes:

    How do I enable the controller both in Emulation Station (when I try to map controllers it doesn’t detect the controller at all) as well as in lr-snes9x-next. My suspicion is that solving in one will solve for everything. Thanks so much for responding with that little hint.

    #121247
    Profile photo of meneerjansen
    meneerjansen
    Participant

    This RetroPie webpage should explain how to setup controllers for the various SNES emulators. They appear not to have an “in game” menu (like Mame when you press TAB on the keyboard).

    If I were you I’d choose an emu that “obeys” the standard key mappings which on my Pi 1 are:

    
    ____________________________________
    Hotkeys        |  Action
    _______________|____________________
    Select+Start   | Exit  (avoid!)
    Select+B       | Reset (avoid!)
    Select+R2      | Save!
    Select+L2      | Load
    Select+Right   | State slot
                   |   increase
    Select+Left    | State slot
                   |    decrease
    Select+X       | Retroarch menu
    _______________|____________________

    Some emulators exit when I press ‘Start’ or don’t start at all w/ certain ROMs. I have to fiddle w/ emulators for each game. Select your emu of choice by pressing left/right a lot when the emu starts up. You see a dialog screen then which lets you select an emulator of choice.

    Good luck! 🙂

Viewing 4 posts - 1 through 4 (of 4 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar