[Solved]Snakebyte idroid:con compatible ?

Home Forums RetroPie Project Everything else related to the RetroPie Project [Solved]Snakebyte idroid:con compatible ?

RetroPie has a new website and forum. Please visit https://retropie.org.uk/ for the new site. The new forum is located at https://retropie.org.uk/forum/. This forum is left here as a read-only archive.

This topic contains 2 replies, has 1 voice, and was last updated by Profile photo of acris acris 2 years, 2 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #87629
    Profile photo of acris
    acris
    Participant

    Hello
    sorry for my English, i am french , i speak a little bit English.

    Hardware :
    raspberry pi 2 model B
    RetroPie Project SD-Card Image V2.5.0, BETA
    same problem with Raspbian

    I tried to connect my gamepad : snakebyte idroid:con . It’s a gamepad for android device. andoid = a little bit linux ?

    I have a nano Bluetooth 4.0 dongle (Trust) –
    I installed the firmware manually which was missing now it’s ok

    hci0 direct firmware load for bmcr/bcm20702A0-0a5c-21e8.hcd failed with error -2
    patch brcm/BCM20702A0-0a5c-21e8.hcd not found

    i had :

    sudo apk-get update
    sudo apk-get upgrade
    sudo apk-get install Bluetooth bluez-utils blueman
    sudo apk-get install bluez-hcidump

    my dongle detects gamepad adress Mac

    hcitool scan 
    20:73:AB:01:98:76 idroid:con

    When i tape :
    bluez-simple-agent hci0 20:73:AB:01:98:76

    i have a error message :

    
    Creating device failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

    why ? my gamepad is not compatible ?

    I tested this line :

    sudo hciconfig hci0 sspmode 0

    it asks for a PIN code that I do not know.
    I tried : 0000 or 1234 or 12345 or 54321 , but nothing

    can you help me ?

    Thanks a lot
    Acris

    • This topic was modified 2 years, 2 months ago by Profile photo of acris acris.
    • This topic was modified 2 years, 2 months ago by Profile photo of acris acris.
    • This topic was modified 2 years, 2 months ago by Profile photo of acris acris.
    • This topic was modified 2 years, 2 months ago by Profile photo of acris acris.

    #87906
    Profile photo of acris
    acris
    Participant

    Hello,
    someone has an idea ?
    is it not compatible ?

    #88063
    Profile photo of acris
    acris
    Participant

    I managed to connect the controller with this command

    sudo Hidd --connect MAC:ADRESS

    I have some problems:

    I have to restart this command on every reboot
    When I leave the use of an emulator, gamepad not working

    why ? can you help me ?

Viewing 3 posts - 1 through 3 (of 3 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar