ScummVm & XinMo Dual Joysticks

Home Forums RetroPie Project Everything else related to the RetroPie Project ScummVm & XinMo Dual Joysticks

RetroPie has a new website and forum. Please visit https://retropie.org.uk/ for the new site. The new forum is located at https://retropie.org.uk/forum/. This forum is left here as a read-only archive.

This topic contains 3 replies, has 2 voices, and was last updated by Profile photo of krauthaus krauthaus 2 years, 1 month ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #90370
    Profile photo of krauthaus
    krauthaus
    Participant

    Ahoi!

    I got my arcade finally working. It was a little bit harsh due to problems like Auto-Autofire on the Axis, getting the right kernel usw.

    My Joysticks are working now in nearly every emulator but in scummvm not. The horizontal joystick axis is working fine; the vertical one is reversed. This only happens in scumm vm. How could i solve this problem?

    Thanks in advance
    krauthaus

    #90374
    Profile photo of killer101
    killer101
    Participant

    For ScummVM the controller mapping is unfortunately hardcoded in the sourcecode. Don’t know you came up with this idea?! I had the problem that all buttons were mapped to “stupid” buttons on the PS3 controller. I changed the sourcecode to my wishes and recompiled it. The fastest solution for me. Maybe you will give it a shot.

    #90401
    Profile photo of krauthaus
    krauthaus
    Participant

    Pfuh i am a really linux noob, but thats a point to start from:D I think i can google for the rest:=)

    #90538
    Profile photo of krauthaus
    krauthaus
    Participant

    Ok, i got to this point:

    -> I have scummvm already on the machine, but it seems that there is no config file for compiling.

    -> So i cloned the scummvm rep from github and used 7zip to unpack all files. (I did this in the pi/home/RetroPie/roms/scummvm folder).

    ->I took a look on the ScummVm Wiki and found the needed packages to get this working. So i installed them. (http://wiki.scummvm.org/index.php/Compiling_ScummVM/GCC)

    ->After i run sudo ./configure the terminal tells me “Looking for C++ compiler… none found!”. GCC and G++ are installed in the newest version.

    So here is my Question:
    1. What could be the problem with the compiler? Everything needed should be installed. Should i do this in another directory?

    I have no clue about compiling, but i am a fast learner. Would appreciate every helping hand i can get!

Viewing 4 posts - 1 through 4 (of 4 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar