[Retropie v3.00 RPi2 Final] EmulationStation freezes with lot of systems (> 10)

Home Forums RetroPie Project Everything else related to the RetroPie Project [Retropie v3.00 RPi2 Final] EmulationStation freezes with lot of systems (> 10)

RetroPie has a new website and forum. Please visit https://retropie.org.uk/ for the new site. The new forum is located at https://retropie.org.uk/forum/. This forum is left here as a read-only archive.

This topic contains 11 replies, has 7 voices, and was last updated by Profile photo of bluescreen bluescreen 1 year, 7 months ago.

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • #104153
    Profile photo of kommissar
    kommissar
    Participant

    Hi everybody,

    I got a problem with EmulationStation : it freezes when lot of games directories have roms inside them.
    * I put 1 rom in more than 20 roms directories : white screen after reboot
    * I removed some roms (so less systems tab to display ~10 systems) : menu is displayed but starts to freeze after browsing 3-4 tabs.
    * under 10 systems : works perfectly
    Is there a limit of the number of systems allowed in ES (due to the RPi2 memory) ? or is it a bug ?

    For info :
    I checked in /tmp if there was an error log : no log found.
    I checked in /home/pi/.emulationstation/es_log.txt : no error in log.
    I tried this on a fresh install.

    If someone has an idea, please tell me πŸ™‚

    Attachments:
    1. es_log.txt
    #104155
    Profile photo of Omnija
    Omnija
    Participant

    Double check your gpumem, im pretty sure default is set to 64mb, raise it to 256 or 512 and see if the problem persists.

    #104157
    Profile photo of herbfargus
    herbfargus
    Moderator
    #104293
    Profile photo of kommissar
    kommissar
    Participant

    Oh, my bad. Sorry for the duplicate.

    I tried to play with the gpumem values (originally 256 upped to 512) : no success.
    Damn, my MEGA HUGE EMULATOR BOX will be a little emulator box. ^^
    I wanted 20+ emulators (i’ve got a 64Go sd card). I will take a more little sdcard.

    #105026
    Profile photo of haris1977
    haris1977
    Participant

    Similar probl here..

    I get white backgrounds (only the name of the emulator is visible) when i install > 8 emulators (e.g 9 , 10 or 11). I am using a BB image of the latest retropie though.

    #105567
    Profile photo of muffy
    muffy
    Participant

    I have the same problem !

    Changing the GPU Memory doensn’t help.
    I think its a problem of Emulationstation and not an issue of the Memory-slpitting.
    Normally ES should have enough Memory, but maybe there is some limitation of the memory ?

    #106386
    Profile photo of gr33k
    gr33k
    Participant

    Same issue of course confirmed on ssmithers dual boot openelec/RetroPie build as well as RetroPie 3.0 Betas and Final.

    ColorPi v1 and v2 themes work fine. It has to do with the backgrounds I assume.

    Testing GPU memory splits higher than 512 to see if that will help maybe per a suggestion here:

    https://github.com/RetroPie/RetroPie-Setup/issues/1011#issuecomment-141617156

    #106389
    Profile photo of gr33k
    gr33k
    Participant

    posted on git but reposting here for easy reference:

    Sooooooo….raspi-config is appending the memory split after other entries which override it:

    #gpu_mem_256=128
    #gpu_mem_512=256
    #gpu_mem_1024=256

    overscan_scale=1
    gpu_mem=896
    arm_freq=1000
    core_freq=500
    sdram_freq=500
    over_voltage=2

    For me on the B+ it’s the gpu_mem_1024=256 line that was resulting in less memory than I had thought to check (derp) thinking gpu_mem=896 would take priority if set explicitly – it does not…so I commented out the other lines.

    960 GPU split is too high it seems and craps out the Pi…had to pull SD card and set config.txt back to 944. This seems to be the limit according to:
    https://www.raspberrypi.org/documentation/configuration/config-txt.md
    (Mental note to read documentation first then tinker lol..)

    Setting to 944 and Pi is dragging along and doesn’t want to fully boot up still (doesn’t seem to be an efficient memory split). Wasn’t patient enough to wait longer, so I set it back to 896 for further testing (again via SDCard reader). This seems to be the highest GPU split that I could do without emulation station not able to boot.

    That said – All themes with multiple backgrounds seem to hang at white screen during boot.

    Tested es-theme-clean-look, es-theme-paradox, es-theme-tronkyfran works fine after changing to it from colorpi theme, but startup hangs at white screen…best one being tronkyfran which was perfect and had a background for everything.

    It seems like Raspi can handle all the backgrounds in some cases, but hangs during boot up specifically. Additionally – it seems to run these emulators and Kodi without running in to memory issues – it seems odd to me that something like background pics would cause a memory limit on a nearly 900MB GPU memory split πŸ™

    I also stopped being lazy and counted how many emulators/icons I have on my setup (including retro pie settings, infocom,etc): 32 total.

    Is this really a limitation on RasPi you think, or is there something wrong with how themes are loaded up during boot-up? If it loads it fine AFTER colorpi starts up…why can’t it do it at bootup with other themes? If it can handle up to 32 emulators after colorpi starts up first, why can’t it boot up with like say…15 emulators?

    Just seems odd! I’m happy to grab any logs or whatever I can do to help πŸ™‚

    Thank you

    #106393
    Profile photo of bluescreen
    bluescreen
    Participant

    sorry for my english πŸ˜‰

    if you have a lot of emus/roms and you have on boot a black/white screen helps to delete the theme folder.the boot process is working again.

    #106394
    Profile photo of gr33k
    gr33k
    Participant

    This can indeed be helpful. However this can be reproduced on a fresh installation of RetroPie 3.0 Final with 10+ emulators in use by installing only 1 rom per emulator.

    My current setup is 32 icons.

    The ColorPi themes v1 and v2 will work just fine.

    If you start up with ColorPi and change to es-theme-tronkyfran – it works fine. It may hang after exiting an emulator, but it will whitescreen during boot up.

    The fact that this works after ColorPi loads 32 systems indicates to me that it’s possible, but it’s a bug some where.

    At least I can use ColorPi until we find a fix one day hopefully πŸ™‚

    #106650
    Profile photo of gr33k
    gr33k
    Participant

    The Carbon theme (static background) also proves to work great on >10 emulator setups. I’ve got mine working with it and carbon-centered.

    Good stuff!

    #106707
    Profile photo of bluescreen
    bluescreen
    Participant

    thx i will try it πŸ˜‰

    *edit*

    thank you it works perfect πŸ˜‰

    • This reply was modified 1 year, 7 months ago by Profile photo of bluescreen bluescreen.
Viewing 12 posts - 1 through 12 (of 12 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar