PSX full screen problems

RetroPie has a new website and forum. Please visit https://retropie.org.uk/ for the new site. The new forum is located at https://retropie.org.uk/forum/. This forum is left here as a read-only archive.

This topic contains 4 replies, has 3 voices, and was last updated by Profile photo of luigisterbr luigisterbr 2 years, 2 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #6867
    Profile photo of dufreche
    dufreche
    Participant

    Hello! πŸ™‚

    I’ve got a problem with the video settings in RetroPie.
    As you can see on the attached picture the PSX emulator is only covering a bit of the screen and I can’t make it fit the entire screen.
    It fits perfectly when i’m browsing around the RetroPie elsewhere and when i play games using the gpSP emulator for GBA games.
    I tried to adjust the video settings in RGUI, but when I change the Aspect Ratio to 16:9 (or anything else) nothing happens when I afterwards reboot and enter the game.

    I hope someone can help me out.
    Thanks for your time πŸ™‚

    Attachments:
    #6870
    Profile photo of trimmtrabb
    trimmtrabb
    Participant

    Hi, edit es_systems.cfg:

    nano /home/pi/.emulationstation/es_systems.cfg

    Navigate to the Playstation section and change:

    COMMAND=/home/pi/RetroPie/supplementary/runcommand/runcommand.sh 1

    to 2, so it reads:

    COMMAND=/home/pi/RetroPie/supplementary/runcommand/runcommand.sh 2

    Hope this helps

    If you have found the solution to your problem please mark the topic as resolved.

    #6871
    Profile photo of dufreche
    dufreche
    Participant

    You are my hero!!

    It worked like a dream! After 2 weeks with controller and screen problems my RetroPie project is finally working as i want it too πŸ˜‰

    Thanks a lot for the quick reply!

    #6873
    Profile photo of trimmtrabb
    trimmtrabb
    Participant

    No problem πŸ™‚ There’s a frameskip option in the Retroarch GUI that may help if you are having framerate issues

    If you have found the solution to your problem please mark the topic as resolved.

    #89461
    Profile photo of luigisterbr
    luigisterbr
    Participant

    Hello!
    My es_systems.cfg file is blank.
    Can you please send me the code so I can past it!
    Thanks a lot!!!

Viewing 5 posts - 1 through 5 (of 5 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar