Pi Box (working name)

Home Forums RetroPie Project Peoples Projects Pi Box (working name)

RetroPie has a new website and forum. Please visit https://retropie.org.uk/ for the new site. The new forum is located at https://retropie.org.uk/forum/. This forum is left here as a read-only archive.

This topic contains 2 replies, has 1 voice, and was last updated by Profile photo of drakaen391 drakaen391 11 months, 3 weeks ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #120221
    Profile photo of drakaen391
    drakaen391
    Participant

    While Pi 3 is on its way…

    Thought I would share my project and get any feedback…

    Photos below and will be updating as the project continues

    It is built out of 1/2 in birch plywood

    The final dimensions will be +\- 2mm. 10.3cm tall 25x25cm

    I will have a feature list added in a little bit

    Installed power supply for cooling system in box

    Attachments:
    #120740
    Profile photo of drakaen391
    drakaen391
    Participant

    Got all the pieces except the screws for the Pi board…

    They temp is running under 100 degrees F at standard load… And only 91 at idle

    Attachments:
    #122546
    Profile photo of drakaen391
    drakaen391
    Participant

    Moved to New Forum

Viewing 3 posts - 1 through 3 (of 3 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar