Only 60MB for ROMS on my 8 GB SD card

Home Forums RetroPie Project Everything else related to the RetroPie Project Only 60MB for ROMS on my 8 GB SD card

RetroPie has a new website and forum. Please visit https://retropie.org.uk/ for the new site. The new forum is located at https://retropie.org.uk/forum/. This forum is left here as a read-only archive.

This topic contains 10 replies, has 6 voices, and was last updated by Profile photo of warmania warmania 2 years, 1 month ago.

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • #88711
    Profile photo of warmania
    warmania
    Participant

    Hi,

    I just install retropie a few days ago et I have a little problem with it. So when I connect my Pie with ethernet to my pc, I see “Retropie” in the network and then I copy my roms into the files but there is only like 60MB free on my 8 GB SD card…

    I made a screenshot.

    Thanks for reading 🙂

    • This topic was modified 2 years, 2 months ago by Profile photo of warmania warmania.

    Attachments:
    #88714
    Profile photo of herbfargus
    herbfargus
    Moderator

    Sudo raspi-config

    Choose expand filesystem

    Reboot

    #88720
    Profile photo of warmania
    warmania
    Participant

    Hi,

    Thanks a lot that was the problem 🙂

    Now I use a logitech F310 Controller and I read there is some troubles with it. Well, I can use it in the menu of emulstation but not in the game, do you know why?

    #88742
    Profile photo of BuToNz
    BuToNz
    Participant

    #88744
    Profile photo of sselph
    sselph
    Participant

    Also on my 310 I had to have the switch on the back set to X. I did that a long time ago so I don’t know if that is still the case.

    Auto-scraper: https://github.com/sselph/scraper

    #88746
    Profile photo of warmania
    warmania
    Participant

    Yes I tried with the X and on some forums people say you need xbox drivers or power hub usb but if it works in the menu, it means that it’s none of this problems…

    #88770
    Profile photo of herbfargus
    herbfargus
    Moderator

    Have you configured your controller for retroarch? The controller configurations for emulation station and the actual emulators are different. When I configured my controller I had to manually edit retroarch.cfg

    #88940
    Profile photo of warmania
    warmania
    Participant

    Hey,

    Thx a lot once again you were truth…

    One last thing before I leave :), I just want to configure an exit button on my controller to not to have to press “esc” everytime.
    I tried the command: input_exit_emulator_btn = 9
    but my system doesn’t reconise the command.. what can I do and how find which button are with which numbers?

    #88958
    Profile photo of webhead
    webhead
    Participant

    hi you dont need a power hub if you use a 2 amp power supply like i do .

    #89001
    Profile photo of Morpheus
    Morpheus
    Participant

    @warmania,

    I use these lines on the very end of my retroarch.cfg for using Select”+”Start” to leave the emulators.

    input_enable_hotkey_btn = "8"
    input_exit_emulator_btn = "9"

    The number of the buttons may be different for your “select” and “start”, if you know what they are, just use the proper button #s.

    B+ | 2 B

    • This reply was modified 2 years, 1 month ago by Profile photo of Morpheus Morpheus.
    • This reply was modified 2 years, 1 month ago by Profile photo of Morpheus Morpheus.
    #89059
    Profile photo of warmania
    warmania
    Participant

    Hi,

    Unfortunetely this command doesn’t work… it is written “commant not found” how else can I fix it?

    I probably didn’t use my command in the wrong place. Where is your ”very end of retroarch.cfg” and how to get here?

    • This reply was modified 2 years, 1 month ago by Profile photo of warmania warmania.
Viewing 11 posts - 1 through 11 (of 11 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar