JUYAO Dual Arcade controller not detected at all :( help!

Home Forums RetroPie Project Controller Configuration in RetroPie JUYAO Dual Arcade controller not detected at all :( help!

RetroPie has a new website and forum. Please visit https://retropie.org.uk/ for the new site. The new forum is located at https://retropie.org.uk/forum/. This forum is left here as a read-only archive.

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of sid723 sid723 1 year, 1 month ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #113598
    Profile photo of helpman
    helpman
    Participant

    Hi!
    Today I wired my JUYAO Dual Arcade Controller and connected it to one of the usb ports of my raspberry pi 2 with retropie installed… emulationstation launched and… no gamepads detected, hold a button blablabla… but nothing.
    Tested it under windows and it’s ok.

    so, after searching for a while, I found this:

    I finally got this working with RPi by creating a file /etc/udev/rules.d/00-arcadejs.rules containing:
    ATTRS{name}==”Arcade Controller JUYAO Dual Arcade”,ACTION==”add”,ENV{ID_INPUT_TABLET}=”0″,ENV{ID_INPUT_JOYSTICK}:=”1″

    and then this, as people said it only recognised 1 player.

    Just needed to change the usb device ID’s

    Add the following to the end of /boot/cmdline.txt

    usbhid.quirks=0x0314:0x0326:0x040

    I did both, restarted the raspberry… and nothing. still dead.

    Any help would be MUCH appreciated šŸ™

    EDITED: just tried LSUSB and vendor/id appears as “0314 0328” with no name after all, just blank…

    EDITED 2: changed the usbhid.quirks to 0314 0328 and now it recognises 2 gamepads.
    Tried setting controls on mame, and player 1 side works great. Player 2 won’t recognise buttons 2,3,4,6,7 šŸ˜• any idea?

    EDITED 3: checked wiring, and the ground daisy cable seems to have a bad connection so from that faston on, nothing worked… Now everything works fine…

    • This topic was modified 1 year, 3 months ago by Profile photo of helpman helpman.
    • This topic was modified 1 year, 3 months ago by Profile photo of helpman helpman. Reason: status update. working all but some buttons
    • This topic was modified 1 year, 3 months ago by Profile photo of helpman helpman. Reason: stupid me

    #120732
    Profile photo of sid723
    sid723
    Participant

    Helpman,
    I was in the same boat and now both controllers are working now.
    My issue is that I want to play 2 player games like Street Fighter or Mortal Kombat that have 3 kick and 3 punch buttons and joystick for each player.
    When I set up the buttons I can only get 2 kick and 2 punch buttons to work.
    Do you know how I can configure the buttons to have 3 kick and punch buttons per player working?

    Appreciate any help you can give.
    Thanks.

    Sid723

Viewing 2 posts - 1 through 2 (of 2 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar