Joystick detected as mouse

RetroPie has a new website and forum. Please visit https://retropie.org.uk/ for the new site. The new forum is located at https://retropie.org.uk/forum/. This forum is left here as a read-only archive.

This topic contains 7 replies, has 3 voices, and was last updated by Profile photo of m312 m312 2 years, 2 months ago.

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #85614
    Profile photo of roxor45
    roxor45
    Participant

    hello all,

    I try to configure my joystick (http://fr.aliexpress.com/item/Xin-Mo-Arcade-to-USB-controller-2-player-MAME-Multicade-Keyboard-Encoder-USB-to-Jamma-game/1375035840.html?recommendVersion=1)

    so i have always the message couldn’t open joystick 0

    I try with number 1,2 ,etc same result

    so when I make this : cat /proc/bus/input/devices

    I have this result :

    I: Bus=0003 Vendor=0314 Product=0126 Version=0110
    N: Name="Arcade Controller JUYA0 Dual Arcade"
    P: Phys=usb-bcm2708_usb-1.3/input0
    S: Sysfs=/devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.0/input/input0
    U: Uniq=
    H: Handlers=mouse0 event0
    B: PROP=0
    B: EV=1b
    B: KEY=fff ffff0000 0 0 0 0 0 0 0 0 0
    B: ABS=f00ff
    B: MSC=10

    I think retropie deteck my joystick as a mouse , could you help me pls

    THXXX 🙂

    #85616
    Profile photo of Floob
    Floob
    Moderator

    Can you confirm the Pi isnt running EmulationStation at the time? Just wondering if something has the device open.

    RetroPie help guides --> https://goo.gl/Yfy8kj
    Please read this before asking for help --> http://goo.gl/eLErnl

    #85635
    Profile photo of roxor45
    roxor45
    Participant

    Émulationstation is running and it’s write “no gamepad detected ” on my Tv

    #85641
    Profile photo of roxor45
    roxor45
    Participant

    did you know how configure directy the conf file for the game controller ?

    • This reply was modified 2 years, 3 months ago by Profile photo of roxor45 roxor45.
    #85714
    Profile photo of Floob
    Floob
    Moderator

    Quit EmulationStation (or change the boot sequence to not run it) then try to configure your controller.

    RetroPie help guides --> https://goo.gl/Yfy8kj
    Please read this before asking for help --> http://goo.gl/eLErnl

    #85765
    Profile photo of roxor45
    roxor45
    Participant

    I try ton configure in ssh and it’s the same

    #85846
    Profile photo of roxor45
    roxor45
    Participant

    help me please ,

    How I can convert this usb controller to an joystick and Not a mouse ?

    or how make a config file for use the mouse event?

    #87201
    Profile photo of m312
    m312
    Participant

    The joystick should be detected in a PC. Plug it in and see.

Viewing 8 posts - 1 through 8 (of 8 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar