How to Setting Controller twin usb ?

Home Forums RetroPie Project Everything else related to the RetroPie Project How to Setting Controller twin usb ?

RetroPie has a new website and forum. Please visit https://retropie.org.uk/ for the new site. The new forum is located at https://retropie.org.uk/forum/. This forum is left here as a read-only archive.

Tagged: 

This topic contains 4 replies, has 3 voices, and was last updated by Profile photo of phipix01 phipix01 2 years, 10 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #7025
    Profile photo of aditraboy
    aditraboy
    Participant

    Hello, how do I set twin usb in retropie?
    I use a controller like this
    http://videogame.brando.com/prod_img/zoom/usbPS2Converter2_B.jpg

    #7037
    Profile photo of trimmtrabb
    trimmtrabb
    Participant

    Hi, with both pads plugged in type in terminal:

    ls /dev/input/

    Are both pads identified, there should be two ‘js’ (joystick) each followed by a number

    If you have found the solution to your problem please mark the topic as resolved.

    #7340
    Profile photo of aditraboy
    aditraboy
    Participant

    hi trimmtrabb
    yes, js0 and js1
    how to configuration?

    #7366
    Profile photo of trimmtrabb
    trimmtrabb
    Participant

    This thread may help you:

    http://blog.petrockblock.com/forums/topic/need-help-with-setting-up-retropie/

    You can also have seperate controls for certain emulators if you place a retroarch.cfg in the respective emulator folder for example: RetroPie/configs/megadrive/

    This will override the default controls in configs/all/

    If you have found the solution to your problem please mark the topic as resolved.

    #9578
    Profile photo of phipix01
    phipix01
    Participant

    @aditraboy

    I use exactly the same Adapter but i couldnt get both controllers to work. Are you using 2 original sony controllers of exactly the same type? Because i think this causes my problem. I tried a original sony and a Logic at first and the Red light from the sony controller turned off as soon as i plugged the other one in. Then I tried with a PS2 and a PS1 controller this works slightly better but not perfect either because i cant have them both running at the same time.
    now if you’d confirm me that 2 controllers of the same type are working i will definetly purchase some more.
    Have you done your configurations yet? does it work fine?

    @trimmtrabb aswell.
    I actually bought a second adapter in hopes that i could have 4 Controllers connected to the pi alltogether.

    Do you guys think the Pi can handle this? Has anyone ever seen or even tried smthing like this?

    I tried these configs once:
    http://blog.petrockblock.com/forums/topic/using-playstation-12-controllers-on-retropie-configs-included/
    but they dont work for me.

Viewing 5 posts - 1 through 5 (of 5 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar