08/17/2015 at 14:53 #104119
1) How do i burn the retropie image to my HDD/USB? Through Win32 Disk imager?
2) Is there any sd-card corruption prevention with this method? Thus meaning we can overclock the pi?
3) Where do we “add” games? In sd card or in usb?
Thanks10/29/2015 at 11:46 #108695
Tried this but the system load times are awful. About 42 seconds to load on SD, well over a minute and a half on my USB stick. And the sticks read speed is twice that of the SD on my PC 🙁12/04/2015 at 10:30 #111183
i have edited the es_systems.cfg file and changed the path line to point to the USB drive.
I copied some files to the roms folder, but somehow, the roms are still copied to the SD drive.
How can i prevent the copying to the SD drive
Roverius12/04/2015 at 11:39 #111188
Change /media/usb0/ to /media/usb/
Your problem is that zero.
cheers!12/04/2015 at 12:28 #11119112/04/2015 at 12:37 #111195
Seems like a path mismatch problem.
What is your full path to roms?
I give you my example:
I got my Amiga roms in this:
MEDIA -> USB -> Retropen (folder in root) -> retropie (emulator roms folder) -> amiga (roms folder)
I guess something is missing between USB and RETROPIE
If you browse your system you can check if your paths are correct.12/04/2015 at 12:45 #111197
i see youre foldername says “Retropen”, so i guess u use a USB Thumbdrive
I use a USB HARDDRIVE (500G disk).
Could it be possible that the path to the disk is not /media/usb, but somthing like /dev/hda or sda or anything like this.
The USB harddrive did populate the romsfolders, but when i enter ls -l /media/usb* i dont see any folders (* = usb0 to usb7)
the harddrive is recognized by the system, but i cant find where it is mounted.12/04/2015 at 13:05 #111199
That is your problem.
Try to get your roms destination under DEV or so.
Once you get your folders your are able to set your path.
I’m using a 64GB usb drive.
Type this command to list your drives:
sudo fdisk -l12/04/2015 at 13:27 #11120012/04/2015 at 13:36 #111202
Default is to SD. If wrong path is set it uses default one.
* emulator folders
and give us your feeedback if everything ok.12/04/2015 at 13:58 #111203
my files are located for example atari2600 in:
R:\retropie\roms\atari2600\ (windows point of view)
the path location is set to:
still the files are copied.
folder names do not have capital letters.12/04/2015 at 14:12 #111204
You have to set your Windows point of view into Linux.
Try to browse into your drive like DOS.
When you get your roms folder you get your path.12/04/2015 at 16:20 #111212
now i am getting somewhere:
I added a line in fstab to mount my drive like
mount /dev/sda1 /mnt/sda
i see the roms now and they do not copy anymore to my SD card.
BUT: they don’t start up, probably due to permissions on that mount point.
so, i have changed the permissions (chmod – R 777 on the romsfolder)
trying to transfer files over FTP does not work (it does copy to the SD card folder)12/04/2015 at 17:01 #111214
I had issues with filesystem in my usb drive.
Once I changed to ext4 I got it fixed.
What about yours?12/04/2015 at 17:05 #111215
mine is set to fat32, but i will change to ext4 (or ext3) and see what hapens.
I keep you informed of the progress.
Thanks for the helpfull information so far.12/04/2015 at 20:48 #111222
1: I have made my USB Harddisk into ext4 filesystem.
2: i checked whit: sudo fdisk -l what drive i had (i this case it was sda5)
3: i did a mount sudo mount /dec/sda5 /mnt/sda
4: I created a folder “retropie” inside the /mnt/sda
midnight commander is a good tool to browse and/or edit files (sudo mc)
5: i reboot the pie and let the drive populate the rom foldes
6: in fstab i made a line to mount the drive
7: changed the permissions on the retropie folder (sudo chmod -R 777 retropie)
8: opened Filezilla and copied some roms to the drive (example: to /mnt/sda/retropie/roms/atari2600)
9: changed the path inside etc/es_systems.cfg into:
all seems to be working fine now and nothing copies to the SDCard.
game started good and i was able to play
Still need some control configuring to exit the game back into menu.
Thanks for some helpfull advice and i hope some others can use this information also to play roms from a USB harddrive.12/04/2015 at 21:09 #111223
Glad you make it and thank you for sharing this info!
For controls I suggest fba topics as they are pretty useful.
Just one final note:
some problems solved by ext4 were related to save states in my case.
Cheers!12/14/2015 at 15:07 #111790
I just set retropie up as well, I am using a regular 8Gb SD Card to boot the system. Obviously, that is way too little to store all the systems I want, so I decided to use a spare 32Gb Pendrive i had lying around.
I found the most simple way to do this would be to simply let the folder “roms” point to my usb stick instead using a soft link. This has the advantage of the default es_systems.cfg being left untouched, when you update retropie using the setup script it’ll revert to the default cfg file, forcing you to manually edit your cfg again. but by soft linking /media/usb to ~/RetroPie/roms, the roms are now in the correct place for RetroPie to find them.
For me, I simply formated the pen drive to use the ext4 filesystem (Retropie would not load roms from the drive if it was formated as FAT32) using the command ‘sudo mkfs.ext4 /dev/sda’ and correcting the permisions afterwards (sudo chmod -R 777 /media/usb). I then moved the folder ~/RetroPie/roms to /media/usb (sudo mv ~/RetroPie/roms /media/usb) and created a soft link to the correct place (sudo ln -s /media/usb/roms ~/RetroPie) and tested a few games. Everything works just fine.12/14/2015 at 15:26 #111792
Thanks for sharing this method.
This link way will help a lot of people since it’s easier to do.03/07/2016 at 12:00 #119448
Need update under 3.6
3.1 allowed for this to work: http://blog.petrockblock.com/wp-content/uploads/2015/07/Getting-strated-with-Retropie.pdf
However it isn’t working under 3.6
Have all my roms on USB HDD, just want to be able to play them again, from the HDD.04/05/2016 at 22:11 #122470
hello, i have used the method mentioned by localhorst86 and i simply can not format my usb stick via raspberry pi. it said that the usb device is in use and cannot be completed. any help ?
im using raspberry pi 3 model b, retropie 3.6
04/06/2016 at 10:45 #122495
- This reply was modified 11 months, 3 weeks ago by xflesk.
Try to use AOMEI Partition tools to format the disk before use in the PI
Its a free tool and you can format the USB drive into Ext3.
Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/