Tagged: 

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • quacka
    Participant
    Post count: 1

    Hi,

    I am running Retropie SD Image 3.2.1 on RPI B+. I am having trouble getting the hotkey and the another button which it binds to work at the same time.

    eg. I bind the hotkey to the select button. The hot key would work but the select button wouldn’t. If I bind the hotkey to the L1 button, L1 button wouldn’t work but hotkey would work.

    Here is my config. Anyone knows what I need to do?
    input_device = “ShanWan USB WirelessGamepad ”
    input_driver = “udev”
    input_x_btn = “0”
    input_a_btn = “1”
    input_b_btn = “2”
    input_y_btn = “3”
    input_l2_btn = “4”
    input_r2_btn = “5”
    input_l_btn = “6”
    input_r_btn = “7”
    input_select_btn = “8”
    input_start_btn = “9”
    input_l3_btn = “10”
    input_r3_btn = “11”
    input_up_axis = “-1”
    input_down_axis = “+1”
    input_left_axis = “-0”
    input_right_axis = “+0”
    input_l_y_minus_btn = “-3”
    input_l_y_plus_axis = “+2”
    input_l_x_minus_axis = “-2”
    input_l_x_plus_axis = “+3”
    input_state_slot_increase_axis = “+0”
    input_state_slot_decrease_axis = “-0”
    input_enable_hotkey_btn = “8”
    input_exit_emulator_btn = “9”
    input_load_state_btn = “4”
    input_save_state_btn = “5”
    input_state_slot_increase_btn = “7”
    input_state_slot_decrease_btn = “6”
    input_pause_toggle_btn = “3”
    input_reset_btn = “0”
    input_menu_toggle_btn = “2”

    dankcushions
    Participant
    Post count: 432
    herbfargus
    Member
    Post count: 1858
Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Controller Configuration in RetroPie’ is closed to new topics and replies.