Help to configure a snes usb controller in rp 2.3

Home Forums RetroPie Project Everything else related to the RetroPie Project Help to configure a snes usb controller in rp 2.3

RetroPie has a new website and forum. Please visit https://retropie.org.uk/ for the new site. The new forum is located at https://retropie.org.uk/forum/. This forum is left here as a read-only archive.

This topic contains 5 replies, has 2 voices, and was last updated by Profile photo of Floob Floob 2 years, 6 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #81842
    Profile photo of inglip22
    inglip22
    Participant

    So, i bought a usb snes controller,it works well in the menu, but how can i paly with it in the games ?
    pls help me :c
    ps: idk nothing about the grammar of the pi-language (?)

    #81854
    Profile photo of Floob
    Floob
    Moderator

    This may help:

    RetroPie help guides --> https://goo.gl/Yfy8kj
    Please read this before asking for help --> http://goo.gl/eLErnl

    #81864
    Profile photo of inglip22
    inglip22
    Participant

    ow, nope, still not working, When i start a game, in the botton appear like “USB SNES GAMEPAD port#2” then “port #1” then again “port #2”.
    then when i press “b” is like start, anywhay i tried to go to “sudo nano USBGamepad.cfg” but there is no file or words, what should i do ? ç_ç

    #81867
    Profile photo of Floob
    Floob
    Moderator

    Does the retroarch USB process in the video complete as shown?
    In the video at 03:28 it confirms what the filename is – what does yours say?

    RetroPie help guides --> https://goo.gl/Yfy8kj
    Please read this before asking for help --> http://goo.gl/eLErnl

    #81889
    Profile photo of inglip22
    inglip22
    Participant

    the same as this guy, “configuration file has been saved as USBGamepad.cfg ..etc”
    and on the top appear a tiny words in light blue : “Raspberry Pi setup […] Installation folder : /otp/retropie for user pi ”

    #81891
    Profile photo of Floob
    Floob
    Moderator

    At 4:40 in the video the path is:
    /opt/retropie/emulators/RetroArch/configs

    Do an ‘ls’ in that directory, then you should see the USBGamepad.cfg file which you can edit.

    RetroPie help guides --> https://goo.gl/Yfy8kj
    Please read this before asking for help --> http://goo.gl/eLErnl

Viewing 6 posts - 1 through 6 (of 6 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar