gpsp Control Setup

RetroPie has a new website and forum. Please visit https://retropie.org.uk/ for the new site. The new forum is located at https://retropie.org.uk/forum/. This forum is left here as a read-only archive.

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of rngeezus rngeezus 2 years, 5 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #82653
    Profile photo of rngeezus
    rngeezus
    Participant

    Hey all,

    I’ve been working on getting my gpsp control scheme setup and I’ve run into a snag. I’ve already made sure the BIOS works and used the gpsp setup utility located in ..\emulators\gpsp, I’m just having difficulty setting up an escape key for my controller. I’m using a SNES controller that I converted to USB using a teensy. It’s set to be read as a keyboard and output the keys mapped to the buttons. The issue is that gpsp provides a menu function for a gamepad, but not in the keyboard scheme! I looked at the .cfg file that I believe was created by the utility, but I just see nonsense (using nano to edit).

    Does anyone have any ideas how I might be able to setup an escape key? I’m pretty sure that gpsp isn’t using a retroarch core, so using that .cfg wouldn’t have any effect would it? Thanks for the help.

    #82665
    Profile photo of gizmo98
    gizmo98
    Participant

    You cannot configure an escape key. You can only open the menu with “select” + “R1” and select exit emulator.

    #82678
    Profile photo of rngeezus
    rngeezus
    Participant

    Thanks for the reply, although that’s a bit disappointing. The issue is that I can’t use the select+R1 feature because my gamepad is read as a keyboard input and gpsp only features the escape command for gamepads, unless I’m missing something..?

Viewing 3 posts - 1 through 3 (of 3 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar