gpio adapter SNES controller

Home Forums RetroPie Project GPIO Adapter, ControlBlock etc. gpio adapter SNES controller

RetroPie has a new website and forum. Please visit https://retropie.org.uk/ for the new site. The new forum is located at https://retropie.org.uk/forum/. This forum is left here as a read-only archive.

Tagged: 

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of alley-cat-jack alley-cat-jack 1 year, 6 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #105449
    Profile photo of litzozoid
    litzozoid
    Participant

    Hi

    My setup rp1 with gpio adapter and snes controller(retropie 3.0). all works fine. Now i want more power and so i bought a rp2. install retropie 3.0 and plug in my gpio adapter. install the snesdev driver. he said “2 controllers was found” but nothing works.

    help!

    mfg litzoZoid

    • This topic was modified 1 year, 7 months ago by Profile photo of litzozoid litzozoid.

    #108316
    Profile photo of alley-cat-jack
    alley-cat-jack
    Participant

    Try all buttons on both controllers to see if any register. I had an issue a while ago where only 1 button would register. The problem was related to either my latch or clock wire, I don’t remember which.

Viewing 2 posts - 1 through 2 (of 2 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar