FBA Libretro – Street Fighter 3

Home Forums RetroPie Project Everything else related to the RetroPie Project FBA Libretro – Street Fighter 3

RetroPie has a new website and forum. Please visit https://retropie.org.uk/ for the new site. The new forum is located at https://retropie.org.uk/forum/. This forum is left here as a read-only archive.

This topic contains 6 replies, has 4 voices, and was last updated by Profile photo of herbfargus herbfargus 1 year, 9 months ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #102231
    Profile photo of gutossn
    gutossn
    Participant

    I can’t run Street Fighter 3 Third Strike at full speed using Raspberry Pi 2 (Retropie 2.6). What I need to config, parameters, etc…

    Thank You.

    Raspberry Pi B+ - Mini Bartop Arcade - Retropie 2.6!

    Raspberry Pi 2 + PS3 Controller Wireless - Retropie 2.6!

    #102236
    Profile photo of Floob
    Floob
    Moderator

    Have you verified your fba-libretro romset?
    https://github.com/RetroPie/RetroPie-Setup/wiki/Managing-ROMs

    It must be FBA 0.2.97.30 as per the info in the link above.
    Then just put your roms in /home/pi/RetroPie/roms/fba-libretro (for RetroPie 2.6.0)

    Or are you saying it runs, just slowly?
    If so, have you overclocked the Pi, and made sure it has a 2A power supply?

    RetroPie help guides --> https://goo.gl/Yfy8kj
    Please read this before asking for help --> http://goo.gl/eLErnl

    #102293
    Profile photo of gutossn
    gutossn
    Participant

    Thank You. The game loads fine. I’ll check the power supply, because i’m using the tv’s usb to power on the raspberry pi 2.

    Raspberry Pi B+ - Mini Bartop Arcade - Retropie 2.6!

    Raspberry Pi 2 + PS3 Controller Wireless - Retropie 2.6!

    #102311
    Profile photo of peanut
    peanut
    Participant

    So what folder do you put the roms to work? and any other changes? I use retropie v3

    #102436
    Profile photo of gutossn
    gutossn
    Participant

    I’ve change the power supply and works fine the Street Fight 3 without lags at full speed! I put the roms in ‘fba-libretro’ folder in /home/pi/Retropie/Roms.

    The colored rainbow square is gone! 🙂
    Thanks!

    Raspberry Pi B+ - Mini Bartop Arcade - Retropie 2.6!

    Raspberry Pi 2 + PS3 Controller Wireless - Retropie 2.6!

    #102602
    Profile photo of peanut
    peanut
    Participant

    /home/pi/Retropie/Roms.

    Not sure if I misunderstand but did you make a folder within the fba rom folder?

    /home/pi/Retropie/roms/fba-libretro/

    #102603
    Profile photo of herbfargus
    herbfargus
    Moderator

    The fba-libretro is a depreciated folder only used in older versions of retropie. For 3.0 you should put your FBA ROMs in the fba folder.

    https://github.com/RetroPie/RetroPie-Setup/wiki/FinalBurn-Alpha

    You can also put them in the neogeo folder as well.

Viewing 7 posts - 1 through 7 (of 7 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar